This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your...
Having trouble with your LG fridge's ice or water dispenser? We have a solution: the Refrigerator Ice Water Line Tube Assembly is ready to get your fridge back in top shape. Why is this part crucial...
This OEM filter measures 2.5 inches deep, 12.5 inches high, 5 inches wide and roughly 1.5 lbs. It is recommended to replace this filter every six months or 300 gallons, whichever comes first. If you n...
Having trouble with your LG refrigerators icemaker or water dispenser? Our Primary Water Valve - Single Coil is here to solve your problem. Its an original OEM part, making it a perfect fit for your L...
This 13-volt evaporator fan motor helps circulate air over the refrigerator coils. These coils will then convert the heat into cool air, which is then circulated from the freezer section to the fresh ...
This valve helps your fridge deliver water to the ice maker and dispenser. If you’re not getting ice, the dispenser isn’t working, or you hear strange noises, this part might be the fix. It’s easy to ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Garett
February 1, 2023
It's blowing cold air in fridge.
freezer gets too warm, ice cream soft. intermitent
fresh food lower drawer freezes, manual damper working
upper fresh food section 54 degrees
imtermitent
tried unplugging and restarting.
temp controls at 36 and -4
For model number LMX25984ST
Hi Garett,
Thank you for your question. If the freezer section of your refrigerator is too warm and the temperature fluctuates in the fresh food section, there are some parts that you will need to check to see which one is causing the issue. You will need to check the thermistor, the evaporator fan motor, the condenser fan motor, the display boards, the PCB main assembly, the defrost sensor and the defrost heater. We have included a link from our website that you may reference on how to check these parts. Once you have determined the part you need, please call customer service. We look forward to hearing from you!
My ice/water maker has stopped working. First, the button on the right side (small water button) got stuck so we shut the water off. Now we turned the water back on and the button is still suppressed, but nothing else is working.
For model number LMX25984ST
Hello Zehra, Thank you for writing. This could be an indication the PCB Board, PartSelect Number PS3533856 was shorted out and may need to be replaced. We hope this helps!
Ice maker doesn’t make ice - water dispenser works just fine. I have done a reset - it does what it’s supposed to - just doesn’t fill with water and make ice
For model number LMX25984ST
Hi Tracy, thank you for reaching out. If there is no issue with the water pressure and the ice maker is working fine, then you may need to check the ice maker fill tube, part number PS3533044, as it is most likely clogged or damaged. If this part is faulty, you may need to replace it. We hope this sorts out your problem!
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
The Refrigerator now runs very quite. After watching several videos I started on mine and found that it was a bit different than any in the videos. However all but the back panel was shown and that was helpful. The back panel was a bit difficult but a hair dryer seemed to help . All in all it was a good choice to do it myself as it was done quicker than waiting on a repair man.
Shut off water supply. Disconnect main supply line. Remove rear lower panel on back of refrigerator. Remove all tubing clamps on back. Disconnect leaking tubing from water supply valve. Remove water filter and unscrew/remove water filter housing. Replace tubing - connect to water filter housing then to water supply valve. Reconnect filter housing and filter. Reinstall lower panel, then main water supply line, then all tubing clamps. Turn water back on and check for leaks after discarding several glasses of water to fill filter. Job complete!
