Having trouble with your LG fridge's ice or water dispenser? We have a solution: the Refrigerator Ice Water Line Tube Assembly is ready to get your fridge back in top shape. Why is this part crucial...
This 13-volt evaporator fan motor helps circulate air over the refrigerator coils. These coils will then convert the heat into cool air, which is then circulated from the freezer section to the fresh ...
This valve helps your fridge deliver water to the ice maker and dispenser. If you’re not getting ice, the dispenser isn’t working, or you hear strange noises, this part might be the fix. It’s easy to ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
October 14, 2022
The compressor will not come on it will not cool everything works but the compressor how do you check to see what is wrong with it
For model number LMX25964ST
Hello Bill, thank you for asking. We would recommend cleaning and testing the compressor and the run capacitor with a multimeter. Such an issue is most probably caused by a defective run capacitor, part number PS3620482. If that does not help, change the compressor assembly, part number PS12739218. Also, make sure the condenser fan is working. Please reach out to customer service if you need help placing an order. Glad to be of help!
FRIDGE DOES NOT COLD, COMPRESSOR DOES NOT COME ON. cAPACITOR IS GOOD, RELAY IS GOOD, COMPRESSOR IS GOODS B UT STILL DONT COMES ON. IF YYOU JUMP START THE COMPRESSOR ITS TURN ON
For model number LMX25964ST
Hello Warren, thank you for contacting us. We would recommend checking the following parts to fix your issue: Evaporator Fan Motor, part number PS3523323, Main Control Board, part number PS3625145, and Defrost Sensor Assembly, part number PS3529165. We look forward to hearing from you if you need assistance with placing an order through our 7-days-a-week customer service. We hope this helps!
Hello Patricia, thank you for your inquiry. Based on our understanding of the issue, we would suggest checking the main control board, part number PS3625142, to solve the issue. It manages the functions of the refrigerator such as cooling and defrost times. Glad to be of help!
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new water inlet valve assembly to refrigerator (1 screw). 7. Replace both water tubes to water inlet assembly. 8. Re-attach both wiring harnesses. 9. Turn water to refrigerator on. 10. Check for leaks. 11. Re-attach bottom sheet cover (6 screws).
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
The Refrigerator now runs very quite. After watching several videos I started on mine and found that it was a bit different than any in the videos. However all but the back panel was shown and that was helpful. The back panel was a bit difficult but a hair dryer seemed to help . All in all it was a good choice to do it myself as it was done quicker than waiting on a repair man.
