LMV1765ST (CS2ELNA) LG Range - Overview

Diagrams for LMV1765ST

See every part. Know exactly what you need.

Parts for the LMV1765ST

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave Grease Filter – Part Number: 5230W1A012E
$21.95
In Stock
Light Bulb - 120V 30W – Part Number: 6912W1Z004B
$24.95
In Stock
Air Duct Bracket – Part Number: 4810W1A151A
$24.15
In Stock
Air Duct Bracket
★★★★★
★★★★★
(1)
Part #4810W1A151A
This bracket holds the metal or plastic flapper that closes off the exhaust duct when the fan is not running and opens when the fan turns on. If the exhaust fan on your microwave does not appear to be working, the problem may be with the damper assembly. If the damper does not open and close easily, check for any damage to the bracket, and replace if it is damaged or faulty. This genuine OEM exhaust damper measures approximately 12 inches long by 5 inches wide.
Read less
Microwave Damper – Part Number: 4900W1A001B
$17.55
In Stock
Microwave Damper
★★★★★
★★★★★
(2)
Part #4900W1A001B
This metal vent damper door closes off the exhaust duct when the fan is not running to stop outside air from entering the microwave unit, and opens when the fan turns on to allow air to vent away from the microwave. This vent damper door measures approximately 10 inches long x 3 inches wide and fits LG microwaves.
Mounting Plate – Part Number: 3300W0A045A
$40.32
In Stock
Mounting Plate
Part #3300W0A045A
This mounting plate is a manufacturer-approved replacement part for your microwave. The mounting plate, or bracket, secures your above-range microwave in place against the wall. To conduct this repair, make sure to first disconnect the power source, and wear protective gloves.
Time Delay Fuse – Part Number: 3B74133Q
$13.15
In Stock
Time Delay Fuse
★★★★★
★★★★★
(1)
Part #3B74133Q
Sold individually.
Microwave Micro Switch – Part Number: 6600W1K001C
$20.85
Special Order
Microwave Micro Switch
Part #6600W1K001C
Microwave Motor Ac Synchronous – Part Number: 6549W1S013H
$50.55
In Stock
Microwave Motor Ac Synchronous
★★★★★
★★★★★
(4)
Part #6549W1S013H
If the turntable on your microwave does not rotate, or you can hear a grinding noise, the problem may be with the motor. The motor is typically located below the floor of the oven, and is accessed through the bottom. The motor is normally held in place with a retaining screw and will have two wires attached to it as well. If the motor is making a grinding noise it will need to be replaced. If the motor does not turn, you can check for voltage or continuity with a multi-meter. Make sure the power is disconnected from your microwave before beginning this repair.
Read less
Glass Cooking Tray – Part Number: 1B71961H
$67.05
In Stock
Glass Cooking Tray
★★★★★
★★★★★
(1)
Part #1B71961H
This tray rotates in your microwave ensuring more even temperatures.
Rivet – Part Number: 4051W3A001A
$11.95
In Stock
Rivet
Part #4051W3A001A
TURNTABLE ASSEMBLY – Part Number: 5889W2A012Q
$41.75
In Stock
TURNTABLE ASSEMBLY
Part #5889W2A012Q
This genuine LG component is an integral part of some LG microwave models. As an authentic OEM piece, you can rely on it to perfectly fit your appliance and function as expected. This particular assembly is designed to keep your microwave's turntable moving smoothly and efficiently. Bear in mind, though, while parts may seem identical, their size and shape can differ slightly. So, ensure the part is the perfect fit for your appliance model before placing an order. Enjoy a seamless cooking experience with this LG turntable assembly.
Read less
Diode (Cable, Assembly) – Part Number: 6851W1A002E
$24.15
In Stock
Diode (Cable, Assembly)
Part #6851W1A002E
View More

Questions And Answers for LMV1765ST

Ask our experts a question about this model and we'll get back to you as soon as possible!

We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jean - For model number LMV1765ST
May 27, 2024
Door doesn't latch. Does whole door need to be replaced or can latches be replaced?
Chris Boyle Profile
Hi Jean, thank you for reaching out. You may not need to replace the entire door. The door latch assembly for your model is part number PS7784846. If you require assistance to place an order, please contact customer service!
$58.25
In Stock
HOLDER ASSEMBLY,LOCKER
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the LMV1765ST

How this model fails, and the parts that fix it.

No heat
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Won’t turn on
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Tray won’t turn
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Doesn’t shut off
Fixed by
these parts
Fixing
Fixing
Show All
Noisy
Fixed by
these parts
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave would not rotate or heat up food.
52 of 77 people found this instruction helpful.
  • Joshua from WHITE LAKE, MI
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
After watching a few youtube videos, I used a phillips SD to take controll pannel off to access the switches that sense when microwave door is closed. Swapped out all 3 switched and mocrowave works like new. $20 fix (shipping included)
Was this helpful?
Thank you for voting!
Broken door micro switch. (unit does not start heating)
37 of 68 people found this instruction helpful.
  • JAMES from BILLINGS, MT
  • Very Easy
  • 30 - 60 mins
  • Screw drivers
Unplug the unit before servicing. Need phillips screwdriver. Open door. Use step ladder to access and remove 2 small screws from top of the room air diffuser at top of unit. Slide diffuser slightly to the left to align the diffuser's plastic tab on the left side to rotate toward you. (The wires for the front control panel are at the far l eft side of this difuser, but difuser is slotted for easy removal). Once the difuser is removed you will see 1 screw at the top that secures the pannel cover on the left side of the unit. Remove screw and slide this panel slightly up and out. This exposes the plastic frame that holds the upper and lower door switches. To locate the door switches and observe how they work, close and open the door and watch the door (bayonets) open and close the micro switches. Do the (red) buttons on top of the switches move up and down when the door bayonets push and release? If the buttons do not "pop" up when opened the switch is defective. The switch frame is secured with 2 screws. Remove screws and rotate the unit out for easy access to the micro switch(s). The internal (spring?) on my unit that is suposed to allow the red (visible) button on top of the switch to "pop" up when the door is opened was broken. Carefully pry the switch outward while being careful to lift the plastic holder-piece that holds the switch in place. Be careful, there is a small pin on the frame, so rotate the switch OUT toward you while lifting (carefully) the plastic holder-piece (you will see it on top of the switch). You can use an ohm meter to test the continuity of the switches. But if the buttons don't "pop" they are defective. Replace switch and reassemble.
Read less
Was this helpful?
Thank you for voting!
needed grease filters for a used over range microwave
26 of 58 people found this instruction helpful.
  • tony from kewanna, IN
  • Really Easy
  • Less than 15 mins
ordered on the part select web site, came quickly, order was correct
Was this helpful?
Thank you for voting!
View More