This crisper shelf glass is a genuine replacement component designed to fit over the crisper drawers in side-by-side refrigerators. Made from durable tempered glass it provides a stable and transparen...
Keep your fridge running efficiently with this genuine LG door gasket. It seals the door tightly to keep cold air inside, prevent frost, and save energy. If your current gasket is worn or cracked, rep...
This ice dispenser door motor is a genuine replacement component designed to restore smooth and efficient operation to your LG refrigerator’s ice dispensing system. As a DC motor it controls the openi...
$64.85
In Stock
Questions And Answers for LFXS24663S
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alanna
June 19, 2026
Troubleshooting:
Fridge doesn’t make ice and fridge and freezer no longer cooling. What can the issue be?
For model number LFXS24663S
Hi Alanna, thank you for contacting us. Ensure that the compressor start relay is working properly. If it is fine, the issue could be with the run capacitor, part number PS11710162. It is a critical electrical component designed to provide the necessary boost to keep your refrigerator's compressor motor starting and running efficiently. You may need to replace it to fix the issue. We hope this solves your problem!
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new water inlet valve assembly to refrigerator (1 screw). 7. Replace both water tubes to water inlet assembly. 8. Re-attach both wiring harnesses. 9. Turn water to refrigerator on. 10. Check for leaks. 11. Re-attach bottom sheet cover (6 screws).
The refrigerator had the above code and when I check on YouTube, it explained that the defrosting was not working properly. It was taking more than 80 minutes to defrost. I ordered the Temperature Sensor first and it was not the issue. I also ordered the Defrost Temperature fuse or the Thermistor. I had to defrost the refrigerator first by using a portable heater to get it done quickly. (See Youtube on how to get to the Defrosting Unit inside the freezer). The Thermistor was the wrong part. I called the Partselect and explained that the part with the heating element is one piece. (Heating Coil Thermistor or Heating Coil). By replacing that piece solved the Error Code issue. I listened to Youtube for the instructions on how to replace the Heater Coil. So if you see the Error Code dH F, you need to replace the Heating Coil, which comes in one piece and sits on the bottom of the Defrost Element.
