This refrigerator water filter replacement is for 2010 LG refrigerators that have either forward French doors or are the four-door dispensing models. This filter is designed to minimize impurities tha...
$77.99
In Stock
Order within the next 7 hrs and your part ships today!
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your...
$13.15
In Stock
Order within the next 7 hrs and your part ships today!
Having trouble with your LG fridge's ice or water dispenser? We have a solution: the Refrigerator Ice Water Line Tube Assembly is ready to get your fridge back in top shape. Why is this part crucial...
$40.65
In Stock
Order within the next 7 hrs and your part ships today!
This refrigerator door shelf bin is a clear, gallon-sized storage accessory designed for installation on the right-side door of select refrigerator models. Crafted from durable, food-safe resin, it fe...
$60.45
In Stock
Order within the next 7 hrs and your part ships today!
Are you tired of wrestling with a sagging freezer basket? Say goodbye to these days thanks to the Left Side Connector Rail, a genuine replacement part from LG. This freezer basket support rail speeds ...
$27.45
In Stock
Order within the next 7 hrs and your part ships today!
Order within the next 7 hrs and your part ships today!
Questions And Answers for LFX33975ST
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
June 12, 2025
Getting the ER FF error code frequently. What is the issue and is it an easy fix?
For model number LFX33975ST
Hi Tom, thank you for reaching out. This error occurs when the freezer fan motor does not operate normally. The evaporator fan motor for your model is part number PS7791877. You may need to replace it to fix the issue. We hope this sorts out your problem!
COMPRESSOR COMES ON AND GETS FRIDGE TO 33 DEGREES THEN WONT COME ON AGAIN UNTILL UNIT IS OVER 40 DEGREES. I DONT KN0W WHEN IT COMES ON AS IT HAPPENS IN THE MIDDEL OF THE NITE. I WAKE UP IN THE MORNING AND I CAN HEAR THE COMPRESSOR RUNNING AND THE FRIDGE IS COOLING. Sorry about the caps did not mean to shout.
For model number LFX33975ST
Hello Thomas, thank you for contacting us. According to our research, we would recommend checking the fresh food section door gasket for any damage. If the gasket is fine, then you may need to replace the thermistor, part number PS3529165. It senses the temperature inside the refrigerator and sends information to the electronic control. We hope this information helps!
For the right side of the refrigerator door, just pulled off the old gasket and replaced it with the new one. Old gasket came off easily. Just had to pull it off. No screws on the right side. Just pushed the new one in place in the groove on the door.
For the left side, needed a Phillip’s screwdriver to remove the flap first. Helps to have a second person hold the door from moving. Once flap was off, pulled the old gasket off and installed the new one just like the right side. Then screwed the flap back on once the gasket was in the groove properly.
Initially after install, it seemed like the magnet on the door was not strong enough but after a couple of days, the magnet seems a lot stronger, sealing the air out. Very happy I replaced it. It was a lot simpler to replace than I thought it would be.
Removed the section of refrigerator that dispenses ice and water. Necessary to pry with object that does not scratch like plastic scraper. Then pull out and replace the switch Micro -- only has one Phillips screw holding switch. Replaced the dispenser and snapped on the New button assembly I broke and job was done. Works perfectly now..
Once I U tubed the the removal and replacement of the gaskets it was super easy. The right gasket change was easy without tools. The left gasket required me to remove the mullion first, which is why I used Utube.
