This refrigerator water filter replacement is for 2010 LG refrigerators that have either forward French doors or are the four-door dispensing models. This filter is designed to minimize impurities tha...
Refrigerator door bin AAP73252202 is an original equipment manufacturer (OEM) part that fits some Kenmore Elite bottom-freezer refrigerators in the following series: 7957204, 7957205, 7957209, 7957218...
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your...
Having trouble with your LG fridge's ice or water dispenser? We have a solution: the Refrigerator Ice Water Line Tube Assembly is ready to get your fridge back in top shape. Why is this part crucial...
This glass shelf provides storage space in your refrigerator above the crisper. Shelves can crack and chip due to frequent use, and should be replaced immediately if cracks start to appear. This shelf...
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim
December 3, 2019
My refrigerator working is not cooling what can be
For model number LFX31925ST
Hello Tim,
Thank you for your question. Our sources suggest replacing the fan motor under part PS7321745 for your model to fix the issue. Hope this helps!
Hello Harry, Thank you for the question. We suggest checking the Drain Tube. Water is normal during the defrost cycle, however it should drain into the pan below the appliance and evaporate. If the water is not draining you may have clogged Drain Tube. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
My ice maker leaks when being filled can parts be gotten
For model number LFX31925ST
Hi Tom,
Thank you for your question. The ice maker is sold as one unit for your model. If your ice maker is leaking, we recommend making sure that the water lines connected to it are fastened correctly and if the fill cup is out of alignment, make sure it is positioned correctly. If the refrigerator is not level, this may cause water to leak from the ice maker. If there are any ice jams, remove them. If it has been more than 6 months since you replaced the water filter, replace it. If you have any questions, please let us know. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
David
November 20, 2023
In bottom freezer the back cover has a lot of ice build up on top right corner I unplugged empty what was in freezer and put it in my upright freezer I removed the bottom drawer and all pull out shelves I took a hair dryer and melted the ice build up it looks like it all melted could the heater be bad or is the sensor bad causing ice to build up I checked door gasket seams to be good what is wrong
For model number LFX31925ST
Hello David, thank you for your inquiry. Based on our understanding of the issue, we would suggest you checking the control board, part number PS8737451. You may need to replace it to fix the issue. Glad to be of help!
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
I suggest turning off the water valve and power to the refrig before starting work. If this is not done the water dispenser will probably spray water down the front of the refrig. The whole icemaker assembly must be pulled out from the front. It is a friction fit--just insert fingers in the ice chute and pull out. The entire piece will pull out from the door. The control panel cover is held in by 8 screws that extend through the circuit board to the cover. It is a good idea to unplug the wiring to the circuit board when replacing the cover to prevent tension damage to the small guage wires. Once the new control panel cover is attached to the circuit board, the whole assembly can be reinstalled into the door.
Shut off water supply. Disconnect main supply line. Remove rear lower panel on back of refrigerator. Remove all tubing clamps on back. Disconnect leaking tubing from water supply valve. Remove water filter and unscrew/remove water filter housing. Replace tubing - connect to water filter housing then to water supply valve. Reconnect filter housing and filter. Reinstall lower panel, then main water supply line, then all tubing clamps. Turn water back on and check for leaks after discarding several glasses of water to fill filter. Job complete!
