LFX28968ST (01) LG Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Front Plate Assembly – Part Number: AGU75188619
$172.59
In Stock
Refrigerator Front Plate Assembly
★★★★★
★★★★★
(35)
Part #AGU75188619
If your fridge doors aren’t sealing properly or you’re noticing cold air escaping, this front plate assembly might be the fix. Also called a mullion or flipper, it fits between the French doors to keep the cold in and your food fresh. Made for select LG and Kenmore models, it’s built from sturdy plastic and helps your fridge run more efficiently. Just check your model number to make sure it’s the right fit.
Door Stopper – Part Number: 4620JJ2009A
$15.35
In Stock
Door Basket – Part Number: AAP73631502
$70.35
In Stock
Refrigerator Water Filter LT700P – Part Number: AGF80300702
$77.99
In Stock
Refrigerator Water Filter LT700P
★★★★★
★★★★★
(4)
Part #AGF80300702
This refrigerator water filter replacement is for 2010 LG refrigerators that have either forward French doors or are the four-door dispensing models. This filter is designed to minimize impurities that can cause ill-tasting water or an unpleasant smell. It reduces sediment, dirt, rust, limescale, sand, and many other contaminants that can be harmful to your health and the life of your appliance. This filter should be replaced every 6 months or 200 gallons to ensure top quality performance. To remove your unwanted filter, press the push button to open the filter cover (water may spill from the hole), pull out the old cartridge in a downward motion. To install the new filter, make it so the ears are in the horizontal position and push the new cartridge into the housing until it stops. Push the filter upward until it is secure. Click the cover to lock it in place. Run water for approximately 5 minutes to prep the filter for use, and discard water. Reset the “filter reset” button if applicable.
Refrigerator Door Bin – Part Number: AAP73631602
$58.25
In Stock
Roller Assembly – Part Number: AHJ72909001
$20.85
Special Order
Refrigerator Door Switch – Part Number: 6600JB1010A
$46.15
In Stock
Handle Screw – Part Number: MJB63190001
$13.15
In Stock
Handle Screw
★★★★★
★★★★★
(2)
Part #MJB63190001
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as they commonly wear at the same rate. This is about 1 inch long and metallic in color.
Glass Shelf – Part Number: MHL62691504
$69.25
In Stock
Glass Shelf
★★★★★
★★★★★
(7)
Part #MHL62691504
This is the replacement shelf glass for your refrigerator. It is made of glass and is approximately 31 inches wide and 16 inches long. The shelf glass for your refrigerator slides over the crisper cover and acts as a sort of lid. It also creates a shelf that you can place food and beverages on. If your current shelf insert glass is broken, this part is the appropriate replacement. Many of our customers have described this repair as easy. To complete the repair, carefully remove the old glass from the frame and replace it with the new pane of glass. This part is sold individually and is an authentic OEM part.

Questions And Answers for LFX28968ST

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lou - For model number LFX28968ST
May 18, 2023
My ice maker fills too much water in its tray and leaks out over area
Chris Boyle Profile
Hello Lou, thank you for asking. It could be that the water pressure is too high. Or, maybe a line had come apart so check the connections on the waterlines. Or it may be the Water Inlet valve PS6448332 needs to be replaced. Good luck with this repair.
Was this helpful?
Thank you for voting!
Brett - For model number LFX28968ST
October 17, 2026
1) Does the waster filter unscrew or pop out? 2) What Air Filter do I need for this model?
Chris Boyle Profile
Hi Brett, thank you for reaching out. The water filter for your model pops straight out rather than unscrewing. The replacement water filter for your model is part number AGF80300702. If you require assistance to place an order, please contact customer service!
$77.99
In Stock
Refrigerator Water Filter LT700P
Was this helpful?
Thank you for voting!
Susan - For model number LFX28968ST
June 24, 2021
I am looking for the modular door bin not sure if the part # is PS7786023 as it shows that it is the fixed door bin? I ordered the part # before but don't remember which bin it was. Thank you.
Chris Boyle Profile
Hello Susan, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS7786021 for the top two bins on the right side door and PS7786023 for the Bottom Bin. PartSelect Number PS7786027 is the Bin for the Top two Bins on the Left Door and PS7786030 for the Bottom bin on the left door. We hope this helps!
$70.35
In Stock
Refrigerator Door Bin
$58.25
In Stock
Refrigerator Door Bin
$59.35
In Stock
Refrigerator Door Basket Assembly
$68.15
In Stock
Refrigerator Door Basket Assembly
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the LFX28968ST

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
replace leaking water inlet valve assembly
42 of 75 people found this instruction helpful.
  • Richard from JACKSONVILLE, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new water inlet valve assembly to refrigerator (1 screw). 7. Replace both water tubes to water inlet assembly. 8. Re-attach both wiring harnesses. 9. Turn water to refrigerator on. 10. Check for leaks. 11. Re-attach bottom sheet cover (6 screws).
Was this helpful?
Thank you for voting!
Remove and replace light switch
45 of 91 people found this instruction helpful.
  • Debbie from Waltham, MA
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
Was this helpful?
Thank you for voting!
The factory door gasket was split and needed replacing
22 of 36 people found this instruction helpful.
  • Carl from LAKE WYLIE, SC
  • Very Easy
  • Less than 15 mins
I pulled the gasket off and installed the new one. It was very easy. All I had to do was to push the new gasket in place in the grooves in the door. The gasket I received was identical to the one I replaced.
Was this helpful?
Thank you for voting!