If your fridge doors aren’t sealing properly or you’re noticing cold air escaping, this front plate assembly might be the fix. Also called a mullion or flipper, it fits between the French doors to kee...
$200.17
In Stock
Order within the next 11 hrs and your part ships today!
This spring is located on the mullion, or door flap, of your fridge. This spring is sourced from the genuine OEM manufacturer for various refrigerator models. It measures about 1.5 inches in total len...
$18.96
In Stock
Order within the next 11 hrs and your part ships today!
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your...
$18.96
In Stock
Order within the next 11 hrs and your part ships today!
Having trouble with your LG fridge's ice or water dispenser? We have a solution: the Refrigerator Ice Water Line Tube Assembly is ready to get your fridge back in top shape. Why is this part crucial...
$53.89
In Stock
Order within the next 11 hrs and your part ships today!
This ice maker assembly is for refrigerators. This Ice maker assembly contains the complete ice maker and housing. The assembly may include multiple parts; refer to your parts diagram for a complete ...
$290.89
In Stock
Order within the next 11 hrs and your part ships today!
This 13-volt evaporator fan motor helps circulate air over the refrigerator coils. These coils will then convert the heat into cool air, which is then circulated from the freezer section to the fresh ...
$243.17
In Stock
Order within the next 11 hrs and your part ships today!
Questions And Answers for LFX25973ST
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank
December 6, 2019
I need the water bypass plug for this fridge, to bypass the water filter option. I cant seem to locate it. Can you help me please.
For model number LFX25973ST
Hello Frank, thank you for inquiring. The replacement for your model refrigerator is Head Cap Assembly part number PS3525885. Good luck with your repair!
Was this helpful?
Thank you for voting!
Scott
November 24, 2022
My lg refrigerator, the refrigerator routinely goes from 34*f to 70*f. The freezer stays between -15 to -3. I also get a. Er dH code on the front panel. I have already replaced the defrost control assembly and the freezer temperature sensor with lg parts. Any help would be greatly appreciated as we really need to get this fixed. Thanks.
For model number LFX25973ST
Hello Scott, thank you for reaching out. The error code Er dH on your LG refrigerator means that the defroster mode has failed. We suggest that you check the evaporator defrost heater, refrigerator temperature sensor, and power control board, as these could be the culprits of the failed defroster mode in your refrigerator. If you require assistance to place an order, please contact customer service. We hope that helps!
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new water inlet valve assembly to refrigerator (1 screw). 7. Replace both water tubes to water inlet assembly. 8. Re-attach both wiring harnesses. 9. Turn water to refrigerator on. 10. Check for leaks. 11. Re-attach bottom sheet cover (6 screws).
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
I pulled the gasket off and installed the new one. It was very easy. All I had to do was to push the new gasket in place in the grooves in the door. The gasket I received was identical to the one I replaced.
