This is a genuine replacement switch. It is a push button style switch that is designed for use in your refrigerator. When the door of your appliance is opened the switch is released, and the light co...
$36.17
In Stock
Order within the next 10 hrs and your part ships today!
This OEM filter measures 2.5 inches deep, 12.5 inches high, 5 inches wide and roughly 1.5 lbs. It is recommended to replace this filter every six months or 300 gallons, whichever comes first. If you n...
$110.46
In Stock
Order within the next 10 hrs and your part ships today!
This part is the replacement water line or tube for your refrigerator. It is made of white plastic and is sold individually. This tube supplies water to the ice maker and water dispenser If your refri...
$24.51
In Stock
Order within the next 10 hrs and your part ships today!
Questions And Answers for LFX25960ST
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
August 4, 2023
power went out now the fridge will not com on
light's blink then shut off
motor noise then no noise
For model number LFX25960ST
Hi Tom, thank you for your inquiry. It appears that your refrigerator may have a damaged control board, part number PS3533719. We hope this sorts out your problem!
Hello William, Thank you for reaching out. You will need to remove the screw used to mount the valve tot he appliance. Slide the valve out of place and transfer the wire connections one by one tot he new valve so you know they are connected properly. Slide the black C-washer out on the waterline connection, pressed the flange "inwards" to release the white plastic water tubing while gently pulling out to disconnect and then push into the new valve. Reinstall by remounting to the appliance. We hope this helps!
Was this helpful?
Thank you for voting!
William
December 28, 2023
Unit will not make any cooling.
For model number LFX25960ST
Hi William, thank you for your inquiry. We have concluded that the issue is with the compressor start relay, part number PS9865140. We would recommend replacing the relay to fix the issue. We hope this solves your problem!
Remove water filter and water filter holder. Removed cover on back of frig. Removed clip where water line connects to back of water filter. Took half inch wrench pushed in on water line lock to release line. Repeat at other end. Reverse steps to put on new line. Easy repair.
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
Turn off power, remove upper and lower drawers (may need to open upper refrigerator doors to remove large freezer bin,) remove drawer supports (upper and lower), remove rear freezer panel (trick is to loosen 4 screws on fan bumpout to get the panel to come free from the freezer side wall), test thermistor with multimeter (should have continuity or near zero resistance across 2 orange fuse wires) before cutting zip ties, cut zip ties holding Thermistor in place, remove old Thermistor, install new Thermistor, install new zip ties, replace rear freezer panel, install upper and lower drawer supports, install drawers, turn on power, should be fixed if error code doesn't return after 6 hours.
