This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can ...
$15.17
In Stock
Order within the next 9 hrs and your part ships today!
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to th...
$18.97
In Stock
Order within the next 9 hrs and your part ships today!
This part releases water from the supply line when it's activated. NOTE: This part may appear different than the original, but is an authorized manufacturer replacement.
$129.55
In Stock
Order within the next 9 hrs and your part ships today!
This cover holds up the top crisper drawer, and has drawer glides molded in it. This upper crisper drawer cover is a manufacturer-approved replacement part for your refrigerator. It has drawer glides ...
$89.48
In Stock
Order within the next 9 hrs and your part ships today!
This original equipment manufacturer Door Shelf is a white plastic part which holds items inside of your freezer or refrigerator door. It is roughly 10 inches long by 4 inches high by 5.5 inches wide....
$62.14
In Stock
Order within the next 9 hrs and your part ships today!
This bin can be moved according to space needed. It holds items on the door of your refrigerator.
NOTE: This bin is only available in clear plastic now.
$121.35
In Stock
Order within the next 9 hrs and your part ships today!
The run capacitor is attached to the compressor. This part is 120 volts and 15 mfd. The run capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things froze...
$48.68
In Stock
Order within the next 9 hrs and your part ships today!
This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen t...
$224.14
In Stock
Order within the next 9 hrs and your part ships today!
This clear plastic crisper drawer is for side-by-side refrigerators. It is sold individually and sourced right from the original manufacturer. Please note that the new pan does not have the humidity c...
$121.66
In Stock
Order within the next 9 hrs and your part ships today!
Keep your produce fresh and your fridge organized with this crisper pan cover frame. It fits above the bottom drawer and helps control humidity levels for fruits and vegetables. The frame is sturdy an...
$105.75
In Stock
Order within the next 9 hrs and your part ships today!
This is the replacement water filter base for your refrigerator. It is approximately 3-1/2 inches by 3 inches. It is made of white plastic with two blue water filter receptacles. The water filter base...
No Longer Available
Questions And Answers for LFSS2612TP0
Ask our experts a question about this model and we'll get back to you as soon as possible!
16 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tami
January 12, 2020
The ice maker has always made odd noises. Today when i push the button to dispense ice, nothing comes out. There is ice, its making ice
For model number LFSS2612TP0
Hi Tami, thank you for your question. If your appliance is not dispensing ice into your cup, then you may need to take a look at your solenoid: PS8691994. However if that part is alright then you may need to look at the ice bin motor: PS10057235 or your dispenser switch: PS1526359 itself for being the issue. Good luck with your repair.
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Laura
December 9, 2023
I need the top door bin , clear 4 sided. 15.3" long, 4" tall and 7" wide. The one pictured shelf does not match this size. I need the shelf described above. Please help me identify the right shelf for my Model
For model number LFSS2612TP0
Hello Laura, Thank you for your inquiry. The compatible top door bin would be part# PS430122. We show the measurements as 15-3/8 inches by 6-5/8 inches by 5 inches. We hope this helps.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Esther
July 25, 2021
A circular black disk like piece fell out if the ice maker dispenser. Where did it come from?
For model number LFSS2612TP0
Hello Ester, Thank you for the question. The Disk could have been the Door Flap from the Dispenser Module, PartSelect Number PS12728798. We hope this helps!
Hello Anthony, thank you for contacting us. We have researched and found that the bulb you asked for is part number PS12364857. For replacing it you should follow these instructions:
1. Unplug the refrigerator.
2. Wear gloves.
3. Remove the light cover.
4. Replace the old LED bulb.
5. Replace the light cover.
6. Plug in the refrigerator.
We hope this helps, good luck with this repair!
One of my shelf clips which holds the vegetable bin broke off. It's a little round white circle with a clip. HELP!!!! I can no long use the bin without the shelf clip to hold onto.
For model number LFSS2612TP0
Hi Jill, thank you for contacting us. The crisper cover clip you are looking for is part number PS430197. We hope that helps!
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle. A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if the maker dumped the ice into the bin.
