This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can ...
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to th...
Need more organized space in your fridge door? This clear plastic shelf bin is perfect for storing 2-liter bottles, condiments, and other everyday items. It installs easily—just snap it into place, no...
This part releases water from the supply line when it's activated. NOTE: This part may appear different than the original, but is an authorized manufacturer replacement.
Need more space on your fridge door? This clear shelf bin is perfect for storing bottles and jars. It’s easy to install—just snap it into place, no tools needed. It fits many Frigidaire, Kenmore, and ...
This door bin holds items on the door of your refrigerator. They are sometimes called Cantilever Shelves as they are supported by the back of the shelf itself to the door of your refrigerator. Sold individually.
Need a new frame for your fridge’s crisper drawer? This one supports the drawer and holds the shelf on top—just note that the glass isn’t included. It’s got raised edges to help catch spills and keep ...
The run capacitor is attached to the compressor. This part is 120 volts and 15 mfd. The run capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things froze...
This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen t...
This is the replacement water filter base for your refrigerator. It is approximately 3-1/2 inches by 3 inches. It is made of white plastic with two blue water filter receptacles. The water filter base...
No Longer Available
Questions And Answers for LFSS2312TP0
Ask our experts a question about this model and we'll get back to you as soon as possible!
13 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Maggie
June 24, 2022
Can I use a less expensive bulb if so what kind?
For model number LFSS2312TP0
Hello Maggie, thank you for your inquiry. The only Bulb is PS12364857 for model LFSS2312TP0. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Refrigerator is flashing an H code- what is wrong and what will I need to do to fix it
For model number LFSS2312TP0
Hello Donald, thank you for your question. H or HI or High Temp indicates the freezer and/or refrigerator section of your appliance have exceeded the temperature threshold. This is usually caused by inadvertently not closing the door all the way or leaving the door open for an extended period of time. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Will
February 25, 2025
No water comes out of door dispenser. Ice maker appears to be working. I am trying to generate a decision tree for diagnosing. Start with water comes into solenoid. Are there 2 solenoids, one for door water, the other for ice maker? Or one solenoid that allows water to go to door and ice maker on demand? Where does filter fit into the system? Does supply go to filter first, then splits to door and ice maker? What is filter filtering? Thank you.
For model number LFSS2312TP0
Hi Will,
Thank you for your question. The water will flow through the filter first before splitting off and going to the dispenser and the ice maker. There is a another solenoid on the water inlet valve. To verify if the water inlet valve is operating normally, you will need to test it for continuity with a multimeter on the Rx1 setting. You should receive a reading between 200 and 500 ohms. If you receive any other reading, you will need a replacement water inlet valve. We hope this helps!
have a problem with icemaker when it calls for water the water comes out of the water dispenser on outside of the freezer door have had a service man try to fix to no help he changed water vilve and frigadere said change wiring harness but that did not work
For model number LFSS2312TP0
Hi Charles, thank you for getting in touch. As you have already replaced the water inlet valve and wire harness, we would recommend checking the ice maker assembly, part number PS12364147. You may need to replace it to fix the issue. We hope this solves your problem!
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle. A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if the maker dumped the ice into the bin.
Used pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food and crisper drawers.
