Sold individually. This grease filter is for microwaves.
Grease filter traps grease from the exhaust air.
Follow the instructions in the owner's manual when installing this part.
$89.32
In Stock
Order within the next 24 mins and your part ships today!
This is an OEM vent damper, which works with microwaves.
$40.82
In Stock
Order within the next 24 mins and your part ships today!
Questions And Answers for LFMV1645TFA
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bilal
July 14, 2021
H, I need the part number of the thermostat kds1 40/70. How to order it. Thank you
For model number LFMV1645TFA
Hello Bilal, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12071292. Please feel free to contact Customer Service at 1-888-738-4871 from 8:00 AM to 10:00 PM Eastern time, 7 days a week if you need help placing an order. We are looking forward to hearing from you!
The black door seal on the inside is leaking. Hot air and grease seep through the small holes. Then on the outside it looks like grease splatters, but it cannot be cleaned.
For model number LFMV1645TFA
Hello Laura, Thank you for writing. The black door seal is not sold separately. It comes only as a Door Assembly on PartSelect Number PS12071329. Good luck with your repair.
Microwave started to lose power intermittently. Slamming door would make it flicker on and off. Banged with my hand and went off for good. Checked power cord, fuse on board all OK. Pulled door switch mount and checked all switches on mount. All good. Filter ass'y board? Does this board pass AC or DC to control board? Thanks
For model number LFMV1645TFA
Hello Robert, Thank you for the question. If you tested both the switches and fuse with a multimeter and they tested good, the PC Board, PartSelect Number PS16221444 could be faulty. We hope this helps!
When we try to use it it will blow out the circuit breaker
For model number LFMV1645TFA
Hello Gerald, thank you for reaching out. Microwaves have fuses to protect them from power surges and other electrical hazards. However, when these fuses blow or get burned, it can cause the circuit breaker to trip off. We would recommend checking it, the part number is PS12071294. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
Plate is off balance. What is the name of the round wheel that goes under the plate?
For model number LFMV1645TFA
Hello Martina, thank you for your question. The round wheel that the tray sits on is Part #: PS12071281
Support. The smaller part that pushes onto the motor shaft on the floor of the unit is the coupler Part #: PS12071282. I hope this helps.
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
First thing I dir was search YouTube for any related videos and found this one https://www.youtube.com/watch?v=uHj4H9Fdxrc, it was the exact problem my microwave was exhibiting. Once I verified the problem by troubleshooting, I removed the part and verified that the switches were working fine, the door latch assembly showed signs of wear which was the cause of the problem. After receiving the replacement part I installed it, verified that power was restored to the unit and reassembled the microwave, works fine, hope it lasts a long time!
My grandfather who is well versed as an electrician checked my microwave out because it wasn't worked. He used a multimeter to check electric current to parts in the microwave. He said a specific thermostat was not getting any current going through. I ordered that replacement part from this site and when it came in it didn't have current running through it either. He said he thought the part that was given to me was faulty. I called this companies number to ask some questions but the machine said they aren't taking any inquiry calls because of the pandemic right now. So I currently don't know what the problem is with my microwave. I want to return the part but unfortunately during Christmas time the packaging got thrown away. So as of right now I'm out the part money and probably money to buy a new appliance.