This is a replacement rack for your oven. The oven rack fits into grooves on the side of the oven wall, and acts as a shelf that you can place food items on when you want to cook them in the oven. Thi...
$155.14
In Stock
Order within the next 4 hrs and your part ships today!
This igniter has a short wire harness. The wire length is approximately 6 inches long.
$123.45
In Stock
Order within the next 4 hrs and your part ships today!
Questions And Answers for LFGH3054UFC
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
April 28, 2023
Neither broil or bake elements will light. There is gas supply as top is working and all electrical controls seem to be operating. Is there just one igniter or two. If two it seems odd that neither work
For model number LFGH3054UFC
Hello Paul, thank you for reaching out. Based on our understanding of the issue, we would suggest checking the safety valve, part number PS5136194, to fix the issue. It controls gas flow to the bake and broil burners in the oven. If this is faulty, the bake and broil elements may not light. We hope this helps!
Repair was quite easy, as long as you have the instructions for removing the door. The screws that hold the bottom of the door to the fixed hinge are placed into the side of the hinge assembly after removal; this holds the door at a 45 degree angle for easy removal. After that, just place the door on a flat surface and dismantle the door from the inside. The inner glass is contained in a metal frame with another piece of glass; this frame comes apart easily using the clips in each side. The door assembles easily after the glass is replaced; just take your time and give yourself enough room to lay out the parts as you go. Good luck!
I called a repair place. They charged $54 to diagnose, (said it needed a new latch motor) then wanted $220 to complete the repair. I checked online prices and did it myself for about 15 minutes work and the latch motor itself ($44?).
Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet metal, then 3 screws that mount the motor. Replace motor, reattach sheet metal. Plug in. Done. Ready to bake cookies.
