This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your...
This deli drawer is for refrigerators.
Deli drawer holds meats, vegetables and snacks in the fresh food compartment of the refrigerator.
Follow the instructions in the owner's manual when installing this part.
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lisa
August 16, 2021
I am looking for a railing for a freezer . Left side.I have a LG refrigerator. ( sliding railing)
For model number LFC25770ST
Hi Lisa,
Thank you for your question. If you are looking for the left rail assembly for the top drawer in the freezer section, the part number listed under your model number for it is AEC73877601. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. If you are looking for the left rail, part number ACJ33058105, that the freezer door slides on, it has been discontinued by LG and you will need to contact them to see if they have information on a replacement. If they provide you with a replacement part number, you may call us back with it and we will verify if we have it available for you. If you have any questions, please let us know.
Hello Richard, thank you for contacting us. We would recommend checking the following parts to fix your issue: Evaporator Fan Motor, part number PS3523323, Defrost Sensor, part number PS3529165, and PCB Assembly, part number PS3530032. We look forward to hearing from you if you need assistance with placing an order through our 7-days-a-week customer service. We hope this helps!
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
Turn off power, remove upper and lower drawers (may need to open upper refrigerator doors to remove large freezer bin,) remove drawer supports (upper and lower), remove rear freezer panel (trick is to loosen 4 screws on fan bumpout to get the panel to come free from the freezer side wall), test thermistor with multimeter (should have continuity or near zero resistance across 2 orange fuse wires) before cutting zip ties, cut zip ties holding Thermistor in place, remove old Thermistor, install new Thermistor, install new zip ties, replace rear freezer panel, install upper and lower drawer supports, install drawers, turn on power, should be fixed if error code doesn't return after 6 hours.