LER3330AAW Admiral Range - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb - 40W – Part Number: 8009
$26.41
In Stock
Light Bulb - 40W
★★★★★
★★★★★
(47)
Part #8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part. It is constructed of glass and metal and is sold individually. Depending on the appliance and location of the bulb within it, you may want to consider disconnecting power and using a flashlight for easier access to unscrewing and re-screwing in your bulb during this repair.
Oven Bake Element – Part Number: WP74010750
$52.44
In Stock
Oven Bake Element
★★★★★
★★★★★
(76)
Part #WP74010750
This bake element has push-on terminal ends. NOTE: This element has been updated by the manufacturer. New installation screws are required. Screws are sold separately.
Long Oven Sensor – Part Number: 12001656
$52.75
In Stock
Long Oven Sensor
★★★★★
★★★★★
(27)
Part #12001656
The oven sensor detects the temperature within the oven cavity and sends the information to the control board. If your oven is not heating evenly, has little or no heat when baking, or is too hot, you may need to replace the sensor. This long oven sensor kit comes with two harness adapters and is a genuine OEM part. Please remember to disconnect the power before starting your repair.
Element with Limiter 6 Inch - 1200W – Part Number: W10823711
$231.78
In Stock
Element with Limiter 6 Inch - 1200W
★★★★★
★★★★★
(40)
Part #W10823711
This 6-inch, 1200-watt radiant surface heating element is a genuine replacement part designed for select ranges. It supplies consistent heat to the designated cooking zone on the stovetop, ensuring even heat distribution for reliable cooking performance. Compatible with Whirlpool, KitchenAid, and other associated brands, this OEM component replaces faulty elements that no longer heat or heat unevenly. Installation should be performed with the appliance unplugged or the circuit breaker turned off. Protective gloves are recommended to avoid injury. Replacing a worn or malfunctioning element helps restore full functionality and cooking efficiency to your range.
Leveler Foot Screw (Nylon) – Part Number: W11665456
$33.95
In Stock
Leveler Foot Screw (Nylon)
★★★★★
★★★★★
(7)
Part #W11665456
This leveling leg is two inches long. It is all black in color and it is made entirely of plastic.
Range Door Gasket – Part Number: WPW10162384
$111.60
In Stock
Range Door Gasket
★★★★★
★★★★★
(33)
Part #WPW10162384
This oven door gasket comes with built in retaining clips.
Screw – Part Number: W11233072
$30.40
In Stock
Screw
★★★★★
★★★★★
(5)
Part #W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
Dual Radiant Element with Limiter – Part Number: W10823709
$231.97
In Stock
Dual Radiant Element with Limiter
★★★★★
★★★★★
(10)
Part #W10823709
The Dual Radiant Surface Element with Limiter is an OEM replacement designed to efficiently distribute heat across the cooking surface of ranges. Equipped with a limiter for safety, it prevents overheating and ensures consistent cooking performance. Always unplug the range or turn off the circuit breaker before installing this part, and wear work gloves to protect your hands. Verify compatibility with your specific model to ensure proper fit.
Inner Door Glass Pane – Part Number: 74003645
$179.14
In Stock
Inner Door Glass Pane
★★★★★
★★★★★
(30)
Part #74003645
Keep your oven safe and functional with this replacement interior door glass, the heat-resistant panel that lines the inside of your oven door. With dimensions of approximately 20 5/8" x 13 1/8", it fits select models and allows you to monitor cooking without opening the door. If your current glass is cracked or broken, replacing it is essential. Always wait until the oven is cool and wear gloves during installation to protect your hands. This part is sold separately and does not come with extra components.
Range Screw w/Washer – Part Number: WP74006515
$11.54
In Stock
Range Screw w/Washer
★★★★★
★★★★★
(1)
Part #WP74006515
This is a replacement screw and washer for your oven/range. It is a Phillips-head screw approximately half an inch long, and the washer is approximately 1 inch in diameter. The screw attaches the oven door handle to the door. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.
Range Broil Element – Part Number: WPW10310249
$125.12
In Stock
Range Broil Element
★★★★★
★★★★★
(11)
Part #WPW10310249
This broil element is found on the roof of the oven.
Range Terminal Block – Part Number: WPW10245259
$41.51
In Stock
Range Terminal Block
★★★★★
★★★★★
(2)
Part #WPW10245259
It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).

Common Symptoms of the LER3330AAW

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The element broke in two pieces after food dried on it.
179 of 185 people found this instruction helpful.
  • Heather from Huntsville, AL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
First, I unplugged the oven. Then, I removed the two screws that hold the element in place. After that, I gently pulled the element toward the front of the oven until the wires were exposed. I disconnected the wires from the old element, removed the old element and then attached the wires to the new baking element. I gently pushed the new element back into the screw holes and screwed the new element in place. When I plugged the oven back into the wall I heard a pop and thought I'd blown up the oven! Turns out the breaker popped...after fixing the breaker, I turned the oven on and the element worked just fine. I highly recommend PartSelect.com for their fast shipping and great products. I will be ordering from them again for future appliance parts.
Was this helpful?
Thank you for voting!
Right rear burner went bad
155 of 190 people found this instruction helpful.
  • Mark from Loxahatchee, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Turned the breaker off, I removed 2 screws securing the range top to the range, opened the top and secured it in the up position, Removed the 2 screws securing the element ,one at a time I swapped the quick connectors from the old element to the new and repeated the process in reverse. I save over $100.00 in labor, plus most companies get you for a trip charge. It was easy!!
Was this helpful?
Thank you for voting!
Oven not holding 350 F, when cooling the coils did not reheat
163 of 215 people found this instruction helpful.
  • David from Westford, MA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. The oven works fine! Note that due to thermal lag the temperature overshoots to 370 degrees and undershoots to 340 degrees, this appears to be normal oven operation. Putting door back in place was easy.
Was this helpful?
Thank you for voting!