LDTS5552D (00) LG Dishwasher - Overview

Diagrams for LDTS5552D

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dishwasher Holder – Part Number: MEG64438801
$13.15
In Stock
Dishwasher Holder
★★★★★
★★★★★
(4)
Part #MEG64438801
This gray mounting bracket is designed to securely hold the dish rack in place inside your dishwasher during operation. Measuring 1 inch by 1 inch, it ensures stability and helps prevent the rack from shifting or causing internal damage. If the holder becomes broken or goes missing, replacing it is essential to maintain proper rack alignment. Each bracket is sold individually and installs easily by snapping into the designated slot.
Dishwasher Roller Assembly – Part Number: 4581DD3003C
$13.15
In Stock
Dishwasher Roller Assembly
★★★★★
★★★★★
(8)
Part #4581DD3003C
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the track in your dishwasher, makes noises, the door will not close, or the dishes are not getting clean, then it is best to replace it for more security. A flat blade screw driver is the only tool needed for this installation. Open the lower dishwasher rack and remove retaining tabs from both ends of the rack and slide it out. Locate the older roll assembly, remove it and replace the rollers. Remember to put the tabs on each side back before sliding it back in. Make sure the dishwasher is off before starting this installation project.
Dishwasher Holder – Part Number: MEG64438901
$13.15
In Stock
Diverter Motor - 120V 60Hz – Part Number: 4681ED3001D
$51.65
In Stock
Hose Drain Assembly – Part Number: AEM74333104
$82.45
In Stock
Hose Drain Assembly
★★★★★
★★★★★
(6)
Part #AEM74333104
This drain hose assembly is designed for use with select LG washing machines and includes both the flexible rubber hose and plastic connectors. It efficiently channels used water from the washer tub to a designated drainage system, such as a standpipe or laundry sink. Over time, the hose may become clogged, dislodged, or damaged by foreign objects or external impact. Signs of a faulty hose include standing water in the tub, leaks, mold growth, or overflow. Prompt replacement is recommended to maintain proper washer performance. Installation requires only basic tools and should be done with the appliance powered off.
Dishwasher Water Inlet Valve – Part Number: 5221DD1001E
$80.25
In Stock
Dishwasher Water Inlet Valve
★★★★★
★★★★★
(1)
Part #5221DD1001E
This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your dishwasher continues to fill after it is full, or if it fills slowly, you may need to replace this valve. Another indication that your valve is damaged and will need to be replaced, is if you notice it is leaking when the dishwasher fills up. Before you begin this repair, be sure to disconnect the water and power sources from your washer. This part is sold individually and is an authentic OEM part.
HOLDER – Part Number: MEG64438902
$13.15
In Stock
HOLDER
Part #MEG64438902
This grey tine row retainer is designed to securely hold the horizontal tine rows on your dishwasher rack, keeping them in place so dishes stay organized and stable throughout each wash cycle. It clips directly onto the rack to prevent tines from loosening or shifting, helping maintain proper spacing for plates, bowls, and cookware. A worn or broken retainer may cause the rack to feel loose or rattle during operation, making replacement necessary for smooth performance. Installation is quick and simply involves attaching the clip to the designated spot on the rack to restore proper support.
ACCESSORY ASSEMBLY – Part Number: 5001DD4001H
$39.55
In Stock
ACCESSORY ASSEMBLY
Part #5001DD4001H
Bushing – Part Number: 4830ED4001B
$13.15
In Stock
Bushing
Part #4830ED4001B
Lower Cover Assembly – Part Number: ACQ88920601
$46.15
In Stock
Lower Cover Assembly
Part #ACQ88920601
This lower cover assembly, also known as a sump cover, is an essential part of the dishwasher’s internal system. It shields the pump and other components from food particles, helps filter debris from water, and ensures proper water flow for efficient cleaning performance. Made for durability and a precise fit, replacing a worn or damaged cover can improve overall dishwasher function. Installation is straightforward and typically requires only basic tools, making it a practical repair for restoring optimal operation.
Tub Gasket – Part Number: 3920DD3005F
$64.85
Special Order
Tub Gasket
Part #3920DD3005F
Prevent leaks and maintain efficient cleaning with this durable dishwasher door gasket, designed to create a watertight seal around the door during operation. Made from high-quality, flexible rubber for long-lasting performance, this genuine replacement part is ideal for fixing issues such as water leaking from the bottom or sides of the door. Installation is simple—just remove the old gasket and press the new one into place following your appliance’s instructions.
Drain Pump – Part Number: ABQ75742501
$120.33
In Stock
Drain Pump
Part #ABQ75742501

Questions And Answers for LDTS5552D

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Linda - For model number LDTS5552D
October 6, 2025
Serial number 301KWUC1F270. I have had this dishwasher not even 2 years and the lower door seal has good bad, causing water to spray through the gasket if bowls are placed too close to the lower rack near the door. The part we need is the lower door seal, plus the metal bar it is attached to. I don't see this anywhere on your website. According to LG, the part has been permanently discontinued. Not very nice for a dishwasher less than 2 years old!
Chris Boyle Profile
Hello Linda, thank you for contacting us. Your model's lower door seal is part number PS12582118, and it connects to the door frame, which is part number PS12081598. We hope that helps!
$18.95
In Stock
FRAME
$59.35
Special Order
GASKET
Was this helpful?
Thank you for voting!
Mark - For model number LDTS5552D
Yesterday
Arm that spins and sprays won’t stay attached
Chris Boyle Profile
Hi Mark, thank you for contacting us. Ensure that there is no damage to the spray arm. If it is fine, the issue could be with the water guide, part number MEA64210203. You may need to replace it to fix the issue. We hope this solves your problem!
$60.45
Special Order
GUIDE,WATER
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the LDTS5552D

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Second roller in on the left side was missing don't ask my how, pulling the bottom rack out the rack would dip down i had to lift it up to pull it the rest of the way out.
9 of 17 people found this instruction helpful.
  • Lenny from KIRTLAND, OH
  • Very Easy
  • Less than 15 mins
Ordered the roller from Parts Select, slid the roller over the little spindle sticking out of the bottom rack and snapped it in place. Job done in less than one minute.
Was this helpful?
Thank you for voting!
Top rack was rusted, needed to replace
3 of 3 people found this instruction helpful.
  • THOMAS from newark, DE
  • Difficult
  • 1- 2 hours
  • Screw drivers
Ordered the top rack only. had to install all the other parts that were attached to the rack. The adjustment handles were the hardest to install b/c you need to take them apart and they have springs that support the adjustment buttons. It took me about 2 hours to remove and reinstall the handles......they were a pain to work with. I would recommend purchasing the complete top rack that has the complete rack that you just need to remove the bad one from the tracks and replace with the new one.
Was this helpful?
Thank you for voting!
Dishwasher was making loud grinding/buzzing noise
4 of 6 people found this instruction helpful.
  • Jon from GARDNERVILLE, NV
  • Easy
  • 1- 2 hours
  • Pliers, Screw drivers, Wrench (Adjustable)
Saw a YouTube video that explained the problem was the pump. Removed dishwasher from under the counter, flipped it on its side, and unplugged the unit. Removed bottom cover and the pump is right there. Used pliers to lose and move 3 hose clamps. Unplugged 3 wires and unscrewed the ground. Unhooked rubber hold downs and removed. Inst alled new pump. Parts Select pricing was best I found and shipping was fast. Nice to have a quiet house again when running the dishwasher. Cost in total was less than $100.
Was this helpful?
Thank you for voting!