The door hinge cable works in conjunction with the dishwasher door by connecting the door hinge to the door spring and helping to support and balance the weight of the door as you open and close it. I...
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the...
If your dishwasher is leaking or not cleaning as well as it used to, the door gasket might be the culprit. This flexible rubber seal fits around the tub and keeps water and steam inside during each cy...
Replacement dishwasher drain hose. Per the manufacturer if the drain hose being replaced does not have the vent tube going to the water inlet assembly a new water inlet will be needed.
Finding the right parts for your dishwasher can be tricky, but were here to help. Consider this Dishrack Roller Bracket by LG? an authentic, OEM part designed to keep your dishwasher operating at opti...
This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wire...
Is your LG dishwasher door not staying firmly shut or opening too abruptly? Then, our LG Door Hinge Spring is the solution you're searching for. Designed exclusively for specific LG dishwasher models,...
This lower dishrack assembly is designed to securely hold dishes and cutlery during the wash cycle in select LG dishwasher models. Constructed from coated metal, it resists rust, cracking, and peeling...
If your dishwasher won’t start or is leaking during a cycle, the door latch might be the problem. This genuine LG latch assembly keeps the door closed tight, helping prevent water from escaping and ma...
$104.96
In Stock
Questions And Answers for LDS5540ST
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Vera
October 11, 2022
I need three black hoses. I live a long distance from a town. I would like to replace these myself but am not sure which ones to order!
For model number LDS5540ST
Hello, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11732679. Thank you for your inquiry, good luck with this repair!
nE code comes up on display after dishwasher cycle. Code error is Vario Motor Error. It has to do with dishwasher spray arms
For model number LDS5540ST
Hello Leon, thank you for reaching out. Our research on error code nE indicates that the issue is probably with the Circulation Motor Assembly, part number PS3579321. If that is not the problem or if you have already fixed that, then the problem would be related to the Diverter Motor, part number PS3579323. If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Hello Bertrand, thank you for contacting us. The FE error code on your LG dishwasher indicates a fill error. We suggest testing the water inlet valve, part number PS8769826, with a multimeter for electrical continuity and replacing it if it shows no continuity. Also, check the mesh filter, part number PS3531957, for any signs of wear and tear. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
This is an LG dishwasher and about 1 hr. and 36 minutes after starting makes a clicking noise in door and goes on for 8 minutes. But it has kicked the breaker twice now somewhere between 30 min. to an hour after starting.
For model number LDS5540ST
Hello Michael, Thank you for your inquiry. Researching the model number that you have provided, the most likely cause of this is a faulty door latch. We would recommend checking it with a multimeter to see if it is working. Good luck with your repair.
My dishwasher OR SIGN and water not going through drain
For model number LDS5540ST
Hello Shantilal, thank you for getting in touch. Check the drain system for blocks and clogs. Clean the dishwasher filter and drain hose. If this does not help, you will need to replace the drain pump, part number PS3579323, to fix the issue. We hope this helps.
Removed mounting screws from sides of disher. Removed broken piece of connector assy still attached to hinge. Attached new connector assy to hinge then looped it around pulley with spring attached to opposite end. Need both hands to pull spring up to side of tub and connect it. I would suggest replacing both connector assemblies while you have the dishwasher pulled out. Push dishwasher back in and mount with screws.
Replacing the spring and connector assembly (the cord had frayed and broken) was easy and took only a matter of minutes to do. Wrestling the dishwasher in and out of its space under the counter was very difficult. Because my kitchen is compact, I had to move the refrigerator first, then disconnect the Romex cable and water lines from the dishwasher before I could pull it fully from under the counter. The side panels have screws in the front and the back, so the appliance had to be moved out until its back was exposed. But I got the job done and the door works just like a new one now!
