The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the...
This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wire...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Doug
November 4, 2022
Can drain hose be replaced? Hose got bent and worry is that it may leak after time.
For model number LDP6810SS
Hi Doug, thank you for your inquiry. Yes, the Drain Hose can be replaced, the part number is PS12078367. If you require assistance placing an order, please contact customer service. We hope that helps!
The indicator control panel is cracked. I need the part and instruction how to install
For model number LDP6810SS
Hello Maria, thank you for contacting us. The part number of the Control Panel is PS12750058. Follow the following general instructions for the replacement of the panel:
First, make sure the power is disconnected. Open the front door of the dishwasher, and remove the screws. After all the screws are removed, carefully pull the panel away from the door. Disconnect the electrical connector wires by depressing the locking tab. To install the new control panel, align the connector wire, and push until it snaps in place. Then, align the tabs on the control panel to the slots on the door, and rotate the panel back in place. Reinstall the screws. We hope this helps!
Hello Marla, Thank you for your inquiry. Researching the model number that you have provided, we show the installation bracket kit-which contains two brackets and 4 screws, as part# PS11775863. We hope this helps you.
This was my first time repairing a dishwasher. I watched YouTube on how to remove the dishwasher from the cabinet. Afterwards, I removed the bottom of the dishwasher while it was laying flat to get to the motor and micro switch. The only difficulty I had was getting to the motor which required taking the bottom section off of the dishwasher. I could not get an appliance repair company to work on an LG dishwasher. My only option was to repair the dishwasher or bought a new dishwasher. Therefore, my wife and I decided to , make an attempt to repair this one with a backup plan of buying a new one. Luckily, we were able to fix this one within two hours.
This was a $999 dishwasher. We saved the cost of a new dishwasher by taking the time to fix this one.
Ordered the roller from Parts Select, slid the roller over the little spindle sticking out of the bottom rack and snapped it in place. Job done in less than one minute.
Was not able to see where the Stopper, Rollers ( Part # PS3523062) could be attached to the back of the bottom tray, to fix the problem. So the parts were useless.