This gray mounting bracket is designed to securely hold the dish rack in place inside your dishwasher during operation. Measuring 1 inch by 1 inch, it ensures stability and helps prevent the rack from...
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the...
This drain hose assembly is designed for use with select LG washing machines and includes both the flexible rubber hose and plastic connectors. It efficiently channels used water from the washer tub t...
This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wire...
This genuine OEM lower spray arm is a key component in LG dishwashers, featuring multiple rotating arms with high-pressure jets that distribute water evenly throughout the tub for thorough cleaning. D...
If your dishwasher isn't performing like it used to, this genuine LG Guide Assembly could be the solution you need. This essential part holds the spray arm steady, fostering a strong link to the water...
This grey tine row retainer is designed to securely hold the horizontal tine rows on your dishwasher rack, keeping them in place so dishes stay organized and stable throughout each wash cycle. It clip...
This dishwasher hose connector ensures a secure connection between the water feed tube and pump housing, allowing proper water flow for efficient cleaning and leak prevention. Made from durable materi...
$121.00
Special Order
Questions And Answers for LDP6809BM
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Troy
February 13, 2024
I need the gasket that goes underneath where bottom wash wand is secured to.
For model number LDP6809BM
Hello Troy, thank you for reaching out. According to our research, the gasket does not come separately. It comes with the sump assembly, part number PS12078828. We hope that helps!
Ordered the roller from Parts Select, slid the roller over the little spindle sticking out of the bottom rack and snapped it in place. Job done in less than one minute.
Remove the lower dish rack, and remove the filter and screen. Using a screwdriver, remove the 4 screws that attach the bottom wash arm, and lift off. Remove the retaining screw on the rubber boot. Slide the boot off of the square steel tubes (there is a metal clamp around this connection, you may need to use pliers to open it. The clamp mechanism is a simple latch that you have to push apart from the two tabs). Open the clamp that came with the replacement part and examine the mechanism to see how it needs to be oriented to secure it. Slide the new boot on, close and latch the clamp. Replace the retaining screw, then the main bottom wash arm with it's 4 screws, the replace the screen and filter and bottom rack.
