This gray mounting bracket is designed to securely hold the dish rack in place inside your dishwasher during operation. Measuring 1 inch by 1 inch, it ensures stability and helps prevent the rack from...
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the...
If your dishwasher is leaking or not cleaning as well as it used to, the door gasket might be the culprit. This flexible rubber seal fits around the tub and keeps water and steam inside during each cy...
Does your dishwasher leak or isn't functioning like it used to? Don't fret ? we have a solution for you. Introducing the LG Tub Gasket, a superior tool designed specifically for your LG dishwasher tha...
This drain hose assembly is designed for use with select LG washing machines and includes both the flexible rubber hose and plastic connectors. It efficiently channels used water from the washer tub t...
This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wire...
This genuine OEM lower spray arm is a key component in LG dishwashers, featuring multiple rotating arms with high-pressure jets that distribute water evenly throughout the tub for thorough cleaning. D...
This pump casing assembly is designed for use in select LG dishwasher models and houses several key components responsible for water circulation during wash and drain cycles. It includes the motor, wh...
This grey tine row retainer is designed to securely hold the horizontal tine rows on your dishwasher rack, keeping them in place so dishes stay organized and stable throughout each wash cycle. It clip...
$17.44
In Stock
Questions And Answers for LDP6797ST
Ask our experts a question about this model and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
November 17, 2023
Door Latch does not latch strong enough and the dishwasher shuts off and just sits there. If I gently hold it closed it will run, but I am not spending an hour and a hlf holding it shut. Is there a replacement for the door latch switch (I think tht is the problem)? and how to replace it?
For model number LDP6797ST
Hello John, thank you for your inquiry. According to our research, the issue is with the door latch, part number PS12580257. You may need to replace is to fix the problem. Disconnect power to the dishwasher. Open the door. Remove the screws holding the dishwasher to the counter. Door latch is located at the top of the dishwasher door. To replace the door latch, you may follow these instructions. These instructions may not be of exact model but will help you with the replacement. Disconnect the electrical connectors on the latch. Remove the screws on the inside of the tub. Grasp both sides of the latch and wiggle it out to remove. Insert the new door latch through the opening, then push the latch back in place next, reinstall the screws, then reconnect the electrical connectors. We hope this helps!
Hello Rod, thank you for your inquiry. Based on our understanding of the issue, we would suggest checking the drain hose for any clogging. If this is not the issue, we would recommend replacing the drain pump, part number PS12579574, to solve the problem. It removes the water from the dishwasher tub during the drain phase of the dishwashing cycle. We hope this helps!
The lower rack that holds the dishes has a broken clip so it will not divide into sections to load in the dishes. And hold the plates upright.
For model number LDP6797ST
Hello Yvonne, thank you for getting in touch. Your model comes with 4 different tine clips having part numbers: PS12081830, PS12081827, PS12081828, and PS12081829. They attach the tine row to the lower dish-rack and allow the tine row to pivot up and down. If you require assistance to place an order, please contact customer service!
Looking to replace a plastic connection part on the bottom rack of the dishwasher. The plastic connection helps holds the rack prongs together and allows them to rotate up and down.
For model number LDP6797ST
Hi Aaron, thank you for reaching out. The part you are looking for is the lower rack holder, part number PS12081829. It attaches the tine row to the dishrack and allows the tine row to pivot up and down. If you need help placing an order, customer service is open 7 days a week!
I am looking to replace broken tine "holders" for the lower rack on my LG Dishwasher. I cannot locate the replacement "holders" on the parts list. Please help....
For model number LDP6797ST
Hello Mike, thank you for the question. According to our research, you may need to replace the following parts: the tine row pivot clip, part number PS12081829, which attaches the tine row to the dishrack and allows the tine row to pivot up and down, the tine row clip, part number PS12081830, which holds the tine row in position, and the tine row retainer, part number PS12081828, which attaches the tine row to the dishrack. We hope this helps!
Replacing this pump is pretty easy. Disconnect the power and drain hose, and pull your dishwasher out from the counter. Lay it on its side on a towel. There WILL be spillage. Disconnecting the pump is simple. There are a couple hoses, one single wire connection (the thermistor) and one multi-wire plug. The pump is held in place by a pair of thick rubber holders which can be pulled off by hand. That's it!
After removing the pump, I disassembled it to find out why these fail so soon. It's a very poor design. I found that the nose of the electric motor, where the bearings are located, sits in a plastic cup formed by the top of the pump body. Any leakage from the pump around the motor shaft will be held in place against the motor bearing. It has no place to go. This causes rusting of the bearing. I expect I'll be replacing this one in a few years. :(
But kudos to PartsSelect for getting the right pump assembly for me, after getting the wrong one from another supplier!
The inside gasket deteriorates over time - However replacement is easy. the main thing you have to remember is after you remove the old gasket, install the new one starting at the middle top of the tub and work your way down both sides. Also, don't push the gasket all the way in...only enough to hold in place. When you close the door the gasket will form a better seal around the door.
Ordered the roller from Parts Select, slid the roller over the little spindle sticking out of the bottom rack and snapped it in place. Job done in less than one minute.
