LDN20718SW LG Refrigerator - Overview

Diagrams for LDN20718SW

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drawer Rail Guide  - Right Side – Part Number: 4975JJ2028C
No Longer Available
Drawer Rail Guide - Right Side
★★★★★
★★★★★
(10)
Part #4975JJ2028C
This guide rail, also known as a drawer slide rail, is a genuine OEM replacement part for the freezer section of your refrigerator. This slide rail supports the storage basket in your freezer, allowing you to slide it open with ease. Our customers have rated this repair as easy.
Crisper Cover - White – Part Number: 3551JJ1005X
No Longer Available
Crisper Cover - White
★★★★★
★★★★★
(9)
Part #3551JJ1005X
Glass is NOT included. NOTE: As per the manufacturer the original support will not work with the updated crisper cover. A new support will need to be ordered.
Rail Guide Assembly - Left Side – Part Number: 4975JJ2028D
$117.79
On Order
Rail Guide Assembly - Left Side
★★★★★
★★★★★
(7)
Part #4975JJ2028D
This left-side drawer slide is designed for use in select refrigerator-freezer models, supporting the freezer drawer and allowing it to glide smoothly in and out. Made of durable white plastic and measuring approximately 15 inches in length, it is specifically engineered for installation on the left side and is not interchangeable with the right-side slide. If the current slide is broken or no longer able to support the drawer, replacement is necessary to ensure safe and reliable operation. Installation requires only a screwdriver to remove the old slide and secure the new one. This item is sold individually and does not include the mounting screw or the right-side slide.
Refrigerator Door Switch – Part Number: 6600JB1010A
$46.15
In Stock
Refrigerator Door Switch
★★★★★
★★★★★
(2)
Part #6600JB1010A
This door switch is used in refrigerators. It is activated by the closing and opening of the door
Door Basket – Part Number: 5004JJ0002A
No Longer Available
Handle Screw – Part Number: MJB63190001
$13.15
In Stock
Handle Screw
★★★★★
★★★★★
(2)
Part #MJB63190001
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as they commonly wear at the same rate. This is about 1 inch long and metallic in color.
Bushing – Part Number: 4984JJ3003A
$13.15
In Stock
Bushing
★★★★★
★★★★★
(2)
Part #4984JJ3003A
This refrigerator door hinge bushing is a durable white plastic component that provides a smooth pivot point for the hinge pin, helping keep the door properly aligned and sealed. It is commonly used to correct doors that sag, make noise, or are difficult to open or close due to a worn or damaged bushing. The bushing installs at the door hinge pivot point and typically requires removing the hinge bracket with a 10?mm socket. Color is white, and size and dimensions may vary by refrigerator model.
Cover Support – Part Number: 4980JJ1016A
$184.97
Special Order
Cover Support
★★★★★
★★★★★
(4)
Part #4980JJ1016A
This cover support reinforces and stabilizes protective panels or covers during operation. Proper support helps maintain alignment and durability. Replacing a damaged support restores structural integrity.
Lower Holder Cover – Part Number: 4930JJ2021A
$87.95
In Stock
Compressor Start Relay – Part Number: 6749C-0014E
$48.35
In Stock
Compressor Start Relay
★★★★★
★★★★★
(1)
Part #6749C-0014E
This compressor start relay and thermistor assembly helps start the refrigerator's compressor and protects it from overheating during operation. It provides the electrical boost needed to get the compressor running, which is essential for maintaining proper cooling inside the refrigerator. If the refrigerator is not cooling properly, the compressor is not starting, or you hear repeated clicking noises, a faulty relay assembly may be the cause. Replacing this part can help restore reliable compressor operation and keep the refrigerator cooling as intended.
Defrost Thermostat – Part Number: 6615JB2005C
$59.35
On Order
Defrost Thermostat
★★★★★
★★★★★
(1)
Part #6615JB2005C
This part is a temperature sensing devise. It senses the rise in evaporator temperature during a defrost cycle and cycles the defrost heater off after all frost is melted. It is calibrated to permit a defrost cycle only when the temperature is below a preset temperature.
Refrigerator Lamp Cover – Part Number: 3550JA1388B
$33.23
On Order

Common Symptoms of the LDN20718SW

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice was building up in the bottom floor of the freezer
42 of 53 people found this instruction helpful.
  • Ronald S. from SANTA CLARITA, CA
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers, Socket set
This refrigerator/freezer problem had been escalating for almost a year, requiring me to frequently knock the ice buildup free with a rubber mallet. I finally decided to try to identify the problem by removing the freezer door and all of the shelves and shelf tracks (easily removed with only a phillips screwdriver). Then I removed the bac k plastic panel to expose the cooling coils, which were partially encased in ice. I deduced that the evaporator fan motor was failing, which blows air over the freezer cooling coils and forces the cool air up into the upper refrigerator section (which was not staying cold). I then found and ordered the fan motor from part select. Their search function and exploded drawing schematics made it easy to identify the part and part number. It seems the original part number had been superceded with a new number, which I ordered. Once it arrived after about a week, I transferred the fan blades from the old motor to the new fan motor, and after completely drying out the freezer compartment, I reinstalled all of the parts and plugged in the unit and waited. By the next day, the refrigerator was operating at peak efficiency, and the ice buildup in the freezer has not returned. I was very close to scrapping the entire refrigerator as junk, but with a little diagnostic effort and about $110 for the new motor, I have a fully functioning refrigerator again. Thanks to Part Select for a great experience.
Was this helpful?
Thank you for voting!
Remove and replace light switch
45 of 91 people found this instruction helpful.
  • Debbie from Waltham, MA
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
Was this helpful?
Thank you for voting!
old bushing worn and broken
23 of 43 people found this instruction helpful.
  • Jerry from CORSICANA, TX
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
removed the upper freezer door to access screws to remove lower door.
laid bottom door on its side, removed bad bushing, put new bushing in, put bottom door back on refridge, put upper door back on fridge. Door worked easy as when new. good closure of door and story..Happy customer, and wife even happier.....thank you....
Was this helpful?
Thank you for voting!