The door hinge cable works in conjunction with the dishwasher door by connecting the door hinge to the door spring and helping to support and balance the weight of the door as you open and close it. I...
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the...
If your dishwasher is leaking or not cleaning as well as it used to, the door gasket might be the culprit. This flexible rubber seal fits around the tub and keeps water and steam inside during each cy...
This flexible, corrugated drain hose assembly is designed to efficiently channel wastewater from your dishwasher to the household drainage system. Installed at the rear of the unit, it connects the di...
Finding the right parts for your dishwasher can be tricky, but were here to help. Consider this Dishrack Roller Bracket by LG? an authentic, OEM part designed to keep your dishwasher operating at opti...
This lower dishrack assembly is designed to securely hold dishes and cutlery during the wash cycle in select LG dishwasher models. Constructed from coated metal, it resists rust, cracking, and peeling...
If your dishwasher won’t start or is leaking during a cycle, the door latch might be the problem. This genuine LG latch assembly keeps the door closed tight, helping prevent water from escaping and ma...
Are you having trouble with misplaced cutlery in your dishwasher? Our LG Silverware Basket Assembly is the solution you've been searching for. Designed specifically for several LG dishwasher models, t...
Having trouble with your LG dishwasher not cleaning your dishes properly? Our Middle Spray Arm Manifold Guide Assembly might be the solution you're looking for. This genuine LG replacement part is cru...
$65.61
In Stock
Questions And Answers for LDF8072ST
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patrick
April 18, 2025
Each wash gives me HE error. I changed the heater. It worked for 2 washes and now back to the HE error. It the only cycle that does not give a error is quick & dry. I'm wondering if there is a other cause? Or, maybe I got a faulty defective heater?
Reply was : "Hello Patrick, thank you for your question. You may have a faulty temperature sensor or thermistor. We hope this helps."
My question: could it be those parts are not available on the website tried to find both of them and no luck. Want to get this fixed asap
Thanks
For model number LDF8072ST
Hi Patrick,
Thank you for your question. If you have replaced the heater and the HE error code has returned, try cutting power to the dishwasher for 10 seconds and then restoring power and starting a cycle to see if the code reappears. If it does, check the drain hose for any clogs and to make sure that there are no kinks in it. Check the filter as well to see if it is clogged. Also check the water inlet valve to insure it is working normally and that water is entering the dishwasher. If the water inlet valve is fine, then you will need to replace the main PCB assembly, part number PS6012660. We hope this helps!
Simple, removed screws securing machine in the cabinet, then pull the unit out of the cabinet space about 10 inches. Springs are accessible within this extension. You need strong hands to extend the springs and attach them. Once attached, push machine back in place and re-install the anchor screws. In my situation, only one spring was broken, so the attached side revealed the correct slot to place the hook on the top position, the bottom position has a plastic lead for the spring, and that lead is attached to a rope to the door hinge. Note: Replace BOTH springs, even if only one is broken.
The inside gasket deteriorates over time - However replacement is easy. the main thing you have to remember is after you remove the old gasket, install the new one starting at the middle top of the tub and work your way down both sides. Also, don't push the gasket all the way in...only enough to hold in place. When you close the door the gasket will form a better seal around the door.
