Models > LDF7774ST

LDF7774ST ((ASTEEUS)) LG Dishwasher - Overview

Sections of the LDF7774ST

[Viewing 8 of 8]
Keep searches simple, eg. "belt" or "pump".
Hinge Cable – Part Number: 4933DD3001B
Hinge Cable
★★★★★
★★★★★
(8)
PartSelect #: PS3524406
Manufacturer #: 4933DD3001B
$23.92
  In Stock
Order within the next 12 hrs and your part ships today!
Spring,Hinge – Part Number: 4970ED4004G
Spring,Hinge
★★★★★
★★★★★
(3)
PartSelect #: PS3524564
Manufacturer #: 4970ED4004G
$31.73
  In Stock
Order within the next 12 hrs and your part ships today!
Roller Assembly – Part Number: 4581DD3003B
Roller Assembly
★★★★★
★★★★★
(2)
PartSelect #: PS3523051
Manufacturer #: 4581DD3003B
$10.04
  In Stock
Order within the next 12 hrs and your part ships today!
Drain Pump Assembly – Part Number: ABQ73503004
Drain Pump Assembly
★★★★★
★★★★★
(9)
PartSelect #: PS11706890
Manufacturer #: ABQ73503004
This drain pump assembly is a genuine OEM replacement part for your dishwasher. In order to complete this repair you will need a Phillips screwdriver, pliers, and a socket. You will need to pull the d...
$156.76
  In Stock
Order within the next 12 hrs and your part ships today!
Roller with Axle – Part Number: 4581DD3002A
Roller with Axle
★★★★★
★★★★★
(1)
PartSelect #: PS3523050
Manufacturer #: 4581DD3002A
Sold individually.
$19.30
  In Stock
Order within the next 12 hrs and your part ships today!
NOZZLE ASSEMBLY – Part Number: AGB73093001
NOZZLE ASSEMBLY
★★★★★
★★★★★
(4)
PartSelect #: PS7788355
Manufacturer #: AGB73093001
$76.98
  In Stock
Order within the next 12 hrs and your part ships today!
Diverter Motor - 120V 60Hz – Part Number: 4681ED3001D
Diverter Motor - 120V 60Hz
★★★★★
★★★★★
(3)
PartSelect #: PS3579323
Manufacturer #: 4681ED3001D
$59.63
  In Stock
Order within the next 12 hrs and your part ships today!
Dishwasher Drain Hose – Part Number: AEM69493808
Dishwasher Drain Hose
★★★★★
★★★★★
(4)
PartSelect #: PS11760658
Manufacturer #: AEM69493808
$141.30
  In Stock
Order within the next 12 hrs and your part ships today!
Door Gasket - Black – Part Number: 3920DD3005A
Door Gasket - Black
★★★★★
★★★★★
(4)
PartSelect #: PS3522654
Manufacturer #: 3920DD3005A
$73.07
  On Order
HOLDER – Part Number: MEG62279201
HOLDER
PartSelect #: PS6012668
Manufacturer #: MEG62279201
$15.75
  In Stock
Order within the next 12 hrs and your part ships today!
Dishwasher Water Inlet Valve – Part Number: 5221DD1001E
Dishwasher Water Inlet Valve
PartSelect #: PS8769826
Manufacturer #: 5221DD1001E
This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wire...
$126.21
  In Stock
Order within the next 12 hrs and your part ships today!
Dishrack Assembly – Part Number: 3751DD1001J
Dishrack Assembly
★★★★★
★★★★★
(3)
PartSelect #: PS12075784
Manufacturer #: 3751DD1001J
$257.64
  In Stock
Order within the next 12 hrs and your part ships today!

Questions And Answers for LDF7774ST

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the LDF7774ST

[Viewing 10 of 10]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door latch failure
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not draining
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not cleaning dishes properly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Will not dispense detergent
Fixed by
these parts
Fixing
Show All
Will not fill with water
Fixed by
these parts
Fixing
Show All
Not drying dishes properly
Fixed by
these parts
Fixing
Show All
Noisy
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken door spring allows the door to overextend to the floor if not propped.
Simple, removed screws securing machine in the cabinet, then pull the unit out of the cabinet space about 10 inches. Springs are accessible within this extension. You need strong hands to extend the springs and attach them. Once attached, push machine back in place and re-install the anchor screws. In my situation, only one spring was broken, so the attached side revealed the correct slot to place the hook on the top position, the bottom position has a plastic lead for the spring, and that lead is attached to a rope to the door hinge. Note: Replace BOTH springs, even if only one is broken.
Parts Used:
Spring,Hinge
  • Gregory L from INDEPENDENCE, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
30 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water not draining, causing "0E" number to appear and initiatate dishwasher shutdown.
According to your site, the part(s), to consider, to resolve the problem were: 1.Motor Assembly DC Pump, OR 2.Drain Pump. I simply selected the drain pump because it was cheaper and because it was making a clicking noise. (The only significant noise that this dishwasher was making) To be safe, I unplugged the unit and turned off the water, under the sink. I removed the kick plate and I unscrewed the anchor clips from under the counter and carefully pulled the unit out. I then opened the dishwasher and removed the lower rack. To minimize water clean-up, I took a rag and soaked up the standing water in the bottom until it was nearly dry. I then tipped the dishwasher on it's left side, knowing where the location of the drain pump (front, right), would be in an easier location for me to work. I first unplugged the pumps wiring. Then, with pliers, I was able to disconnect the clips on the short, rubber hoses that hold the pump in alignment.(Use caution: If reusing the same rubber hose(s) on the new pump, it will be easier if you put them on in the same direction as they were take off) Then I removed the rubber supports off their hooks, that allow the pump to hang from the bottom of the dishwasher. Once the rubber hoses are re-connected on the new pump and placed on to it's former proper alignment, you can re-attach the rubber supports to their hooks. And last, but not least, remember to plug the new pump's wires back in place. Carefully stand up dishwasher and push it slowly back into place. I plugged in the unit and turned on the water. Before I screwed the unit back to the counter and kick plate back on the front, I ran a load and watched for leaks beneath the new pumps area. No leaks. "Easy, Peasy".
Parts Used:
Drain Pump Assembly
  • Patrick from CHANDLER, AZ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
23 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher wouldn’t completely drain
Shut off electrical breaker, Removed bottom cover plate by removing 2 Phillips head screws. I was able to remove the pump without pulling the dishwasher out by removing wiring connection, hose clamps with a pair of pliers, and removed the 2 rubber hangers However I couldn’t reinstall the pump without pulling the dishwasher out. 1.I disconnected the electrical wiring (breaker was shut off). 2. Shut the water supply off and removed water line at the dishwasher. 3. Disconnected the drain at the sink. 4. Removed the 2 retaining screws 1 on each side that secures the dishwasher in place. 4. Removed the upper and lower racks, Used a shop vac and sucked the water out of the bottom of the dishwasher. 5. Pulled the dishwasher out making sure the drain line came with it. 6. Laid The dishwasher over on the back side to the floor. 7. Reinstalled pump with new hose clamps and hoses that came with the pump. ( it probably would have been easier to remove the pump with the dishwasher pulled out) reinstall the wire connection to the pump (snap in connection), connected the 2 new rubber hangers to pump and connected to the dishwasher . 8. Slide the dishwasher back in place and reconnect water line be sure and use some Teflon tape, reconnect electrical wiring, reconnect drain line, secure dishwasher with screws. Turn water on and check for leaks, turn electrical power back on. I ran the dishwasher to make sure it worked and make sure there weren’t any leaks before I installed the bottom cover plate.
I had an appliance service person say that they wouldn’t work on an LG because they were hard to work on and very difficult to get parts. My experience was just the opposite thanks to partselect. The Dishwasher works like brand new.
Parts Used:
Drain Pump Assembly
  • Robert from VERNAL, UT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
14 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!