LCE3010SB (01) LG Cooktop - Overview

Diagrams for LCE3010SB

See every part. Know exactly what you need.

Parts for the LCE3010SB

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Range Radiation Heater – Part Number: MEE62385201
$198.03
Special Order
Range Radiation Heater
★★★★★
★★★★★
(3)
Part #MEE62385201
A dual radiant heater supplies heat to a cooking area beneath a glass cooktop. Replacement may be needed when one zone does not warm, only the inner or outer section works, or the element has a visible break. Normal radiant burners cycle on and off, so cycling alone does not prove a failure. Check the control switch and connections first, then match the replacement by full model number, location, size, mounting points, and electrical rating. Disconnect the range at the breaker and confirm the circuit is dead before service. Handle sharp metal edges and the glass top carefully, and return every bracket, shield, and wire to its original position.
Read less
Radiant Heater – Part Number: 5300W1R004A
$134.16
In Stock
Connector,Terminal Block – Part Number: 6640000045A
$59.35
In Stock
Connector,Terminal Block
Part #6640000045A
PCB Assembly,Interface – Part Number: EBR56867401
$58.25
Special Order
PCB Assembly,Interface
Part #EBR56867401
Bracket,Idle – Part Number: MAZ39918701
$37.35
Special Order
Bracket,Idle
Part #MAZ39918701
Heater,Radiant – Part Number: 5300W1R007A
$190.84
Special Order
Heater,Radiant
Part #5300W1R007A
Heater,Radiant – Part Number: 5300W1R014A
$147.90
Special Order
Heater,Radiant
Part #5300W1R014A
Heater Assembly – Part Number: AEG33897001
$72.55
In Stock
Heater Assembly
Part #AEG33897001
Holder,Wire – Part Number: 4B72510F
$13.15
Special Order
Holder,Wire
Part #4B72510F
Screw,Tapping – Part Number: 1TBL0503518
$13.15
Special Order
Screw,Tapping
Part #1TBL0503518
Screw,Tapping – Part Number: 1TTL0402422
$13.15
Special Order
Screw,Tapping
Part #1TTL0402422
Customized Washer – Part Number: 1WZZ81N001A
$30.95
In Stock
Customized Washer
Part #1WZZ81N001A
View More

Questions And Answers for LCE3010SB

Ask our experts a question about this model and we'll get back to you as soon as possible!

We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert - For model number LCE3010SB
November 17, 2023
The front right dual burner temperature cannot be controlled. When it is turned on using either the centre burner or the full burner, it simply turns on and stays on at full heat until you shut it off no matter what temperature setting you use. What part controls this?
Chris Boyle Profile
Hello Robert, thank you for getting in touch. Based on our research, the issue is most probably with the radiant surface element. We recommend replacing the radiant surface element, part number PS7795472, to solve the problem. It supplies the heat to a cooking area on top of the range. We hope that helps!
$198.03
Special Order
Range Radiation Heater
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the LCE3010SB

How this model fails, and the parts that fix it.

Element will not heat
Fixed by
these parts
Fixing
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Hammer 1, Glass range top and heating element 0
24 of 56 people found this instruction helpful.
  • Richard from CHESAPEAKE, VA
  • Easy
  • 30 - 60 mins
  • Screw drivers
Dropped a hammer on the range while removing a ceiling light. Viewed a How-To video on Google. Ordered the needed parts. Followed the steps from the How-To video. Reinstall was a bit tricky by myself - could have used an extra set of hands. I have a few words of caution:
1) Put something between the range top and range - like a sheet or drop cloth - to prevent a dropped screw from falling into a crevice in the stove. I dropped a screw and was unable to retrieve it, even with a magnet.
2) Makes sure you remove all bumpers, screws, clips, etc. from the item being replaced and put them on the new item if the new item does not come with replacement bumpers, screws, etc.
Read less
Was this helpful?
Thank you for voting!
View More