LBC22520ST (AST1LGG) LG Refrigerator - Overview

Diagrams for LBC22520ST

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Door Switch – Part Number: 6600JB1010A
$46.15
In Stock
Refrigerator Door Switch
★★★★★
★★★★★
(2)
Part #6600JB1010A
This door switch is used in refrigerators. It is activated by the closing and opening of the door
Bushing – Part Number: 4984JJ3003A
$13.15
In Stock
Bushing
★★★★★
★★★★★
(2)
Part #4984JJ3003A
This refrigerator door hinge bushing is a durable white plastic component that provides a smooth pivot point for the hinge pin, helping keep the door properly aligned and sealed. It is commonly used to correct doors that sag, make noise, or are difficult to open or close due to a worn or damaged bushing. The bushing installs at the door hinge pivot point and typically requires removing the hinge bracket with a 10?mm socket. Color is white, and size and dimensions may vary by refrigerator model.
Compressor Start Relay – Part Number: 6749C-0014E
$48.35
In Stock
Compressor Start Relay
★★★★★
★★★★★
(1)
Part #6749C-0014E
This compressor start relay and thermistor assembly helps start the refrigerator's compressor and protects it from overheating during operation. It provides the electrical boost needed to get the compressor running, which is essential for maintaining proper cooling inside the refrigerator. If the refrigerator is not cooling properly, the compressor is not starting, or you hear repeated clicking noises, a faulty relay assembly may be the cause. Replacing this part can help restore reliable compressor operation and keep the refrigerator cooling as intended.
Defrost Thermostat – Part Number: 6615JB2005C
$59.35
On Order
Defrost Thermostat
★★★★★
★★★★★
(1)
Part #6615JB2005C
This part is a temperature sensing devise. It senses the rise in evaporator temperature during a defrost cycle and cycles the defrost heater off after all frost is melted. It is calibrated to permit a defrost cycle only when the temperature is below a preset temperature.
Refrigerator Lamp Cover – Part Number: 3550JA1388B
$33.23
On Order
Guide Rail Assembly - Right Side – Part Number: 4975JJ2002A
$59.35
Special Order
Guide Rail Assembly - Left Side – Part Number: 4975JJ2002B
$59.35
Special Order
Evaporator Fan Motor – Part Number: 4681JB1027N
$138.87
In Stock
Evaporator Fan Motor
Part #4681JB1027N
Water Valve Assembly – Part Number: AJU55759303
$58.25
In Stock
Water Valve Assembly
★★★★★
★★★★★
(1)
Part #AJU55759303
This water inlet valve assembly is an essential component for maintaining optimal performance in your refrigerator’s ice maker and water dispenser systems. It precisely regulates the flow of water from the household supply line ensuring the correct volume is delivered for ice production and water dispensing. Engineered for reliability the valve helps prevent leaks by securely controlling water flow when not in use contributing to the overall efficiency and longevity of the appliance. Installation is straightforward and typically requires only basic tools. The valve is compact in design and constructed from durable materials to withstand regular use in a kitchen environment.
Clip – Part Number: 4004JA3002A
$13.15
In Stock
Clip
Part #4004JA3002A
Refrigerator Slide Rail – Part Number: 5218JJ3001A
$61.55
In Stock
Refrigerator Slide Rail
Part #5218JJ3001A
SOCKET,LAMP – Part Number: EAG62831801
No Longer Available
SOCKET,LAMP
Part #EAG62831801
This part is a replacement light socket for your refrigerator. This model is white in color, and it has two sockets that will fit two separate light bulbs. The light socket connects to the power source, and the light bulb is screwed into it. If the light in your refrigerator is not working when you open the door, you could have a faulty socket. It is important to determine if the light bulbs are simply burned out, or if the socket is causing the issue. Be sure to disconnect your refrigerator from the power source before you begin this repair. This is an OEM part sourced directly from the manufacturer.

Common Symptoms of the LBC22520ST

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice was building up in the bottom floor of the freezer
42 of 53 people found this instruction helpful.
  • Ronald S. from SANTA CLARITA, CA
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers, Socket set
This refrigerator/freezer problem had been escalating for almost a year, requiring me to frequently knock the ice buildup free with a rubber mallet. I finally decided to try to identify the problem by removing the freezer door and all of the shelves and shelf tracks (easily removed with only a phillips screwdriver). Then I removed the bac k plastic panel to expose the cooling coils, which were partially encased in ice. I deduced that the evaporator fan motor was failing, which blows air over the freezer cooling coils and forces the cool air up into the upper refrigerator section (which was not staying cold). I then found and ordered the fan motor from part select. Their search function and exploded drawing schematics made it easy to identify the part and part number. It seems the original part number had been superceded with a new number, which I ordered. Once it arrived after about a week, I transferred the fan blades from the old motor to the new fan motor, and after completely drying out the freezer compartment, I reinstalled all of the parts and plugged in the unit and waited. By the next day, the refrigerator was operating at peak efficiency, and the ice buildup in the freezer has not returned. I was very close to scrapping the entire refrigerator as junk, but with a little diagnostic effort and about $110 for the new motor, I have a fully functioning refrigerator again. Thanks to Part Select for a great experience.
Was this helpful?
Thank you for voting!
Remove and replace light switch
45 of 91 people found this instruction helpful.
  • Debbie from Waltham, MA
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
Was this helpful?
Thank you for voting!
old bushing worn and broken
23 of 43 people found this instruction helpful.
  • Jerry from CORSICANA, TX
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
removed the upper freezer door to access screws to remove lower door.
laid bottom door on its side, removed bad bushing, put new bushing in, put bottom door back on refridge, put upper door back on fridge. Door worked easy as when new. good closure of door and story..Happy customer, and wife even happier.....thank you....
Was this helpful?
Thank you for voting!