***NOTE: Ice maker does NOT come with the bail or shut off arm. You must order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and th...
$187.53
In Stock
Order within the next 4 hrs and your part ships today!
This part is accessed from the front of the appliance in the bottom left-hand corner in top-freezer refrigerators. It is white in color and measures 1-1/8 inches deep, 2-1/8 wide and 10-1/2 inches hig...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Reginal
March 30, 2023
Location of filter and how to change it out?
For model number KUDF204ESB00
Hello Hank, thank you for getting in touch. According to our research, the water filter is located in the front base grille. To change the filter, use the following instructions:
1. Rotate the filter cap in an anticlockwise direction to a vertical direction and pull the cap and water filter out through the base grille.
2. Remove the filter cap by sliding it off the end of the old filter. The cap will slide to the left or right.
3. Do not discard the cap; it is part of the filter. Keep the cap to use with the new filter.
4. Take the new filter out of its packaging and remove the cover from the O rings.
5. Slide the filter cap on the new filter.
6. With the filter cap in the vertical position, insert the new filter into the base grille until it stops.
7. Rotate the cartridge cap clockwise to a horizontal position.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I backed out the 2 top screws about a quarter inch and then removed bottem screw with a quater inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection with a small screwdriver. The new Ice Maker was wired correctley for my refrigeator so all I had to do wea reconnect the power connection and mount new Ice Maker on the two top screws and install the bottem screw. It took e while for the new Ice Maker to start it's cycle but after it did, it worked GREAT. Part Select service was OUTSTANDING, ordered part one day and received the next. THANKS!!!!
I am NOT a handyman, and my family laughed at me when I said I was going to fix the ice maker all by myself. I ordered a replacement ice maker. When it arrived, I opened the box and read the instructions. It seemed easy. I removed the old ice maker, with a socket set. I then took off the shut off lever from the old one and placed it on the new one, since the new one didn't come with it. I then put the new one in place. All the parts fit perfectly. The ice machine was making ice within an hour. My family was amazed... and I got the last laugh!
Removed 2 screws holding water fill tube to rear of refrigerator and pulled out, matched old part with new to make sure of proper match. Guide new fill tube thru hole, making sure it is aligned with slot in ice cube tray on inside of freezer. Install new plastic line from water pump outlet to water fill tube, check for leaks, job done.