This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult....
Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
This is a lower spray arm for a dishwasher. The lower spray arm allows water to be spread evenly throughout the dishwasher tub with the proper force so dishes come out clean. This spray arm is gray in...
The tine pivot clip, also known as the tine row pivot, is used in dishwashers and is located in the upper dishrack. At around 3 inches in length, the clip is used to keep the tine row in place in the ...
This manufacturer-approved Rack Stop Clip is a gray plastic part which can be installed with a screwdriver. Measuring slightly over an inch in length, it prevents the rack from sliding too far and fal...
This drain pump is used in dishwashers to remove water from the dishwasher tub. If the impeller in the dishwasher is damaged or the motor has been shorted out and will not drain, it is possible the bo...
Prevent leaks and maintain optimal cleaning performance with this durable dishwasher door seal. It creates a secure barrier to keep water contained during wash cycles, ensuring reliable operation. Rep...
This part is the replacement door seal for your dishwasher. It is approximately 22 inches long and 2 inches wide. This door seal is made of gray plastic and is found at the bottom the dishwasher. The ...
Also known as rack adjuster. Sold individually.
This is an original part from KitchenAid, Kenmore, Whirlpool, Jenn-Air, and Maytag for use with Dishwashers. The dishrack adjuster arm positioner clip...
This is also called the 3rd-level spinner. This part works like a little spray arm at the top of your dishwasher.
$37.43
In Stock
Questions And Answers for KUDE40FXSS5
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
January 4, 2020
Dishwasher starts but quits in a few minutes. The control panel is blank when this happens.
For model number KUDE40FXSS5
Hello Richard and thank you for writing.
It certainly sounds like it could be a faulty door latch PS8770043, you should check for signs of damage, and replace if necessary. We hope this helps. Please contact us anytime.
The dishwasher will not start Greenlight blinking 4 times then pause then blinks 4 times
For model number KUDE40FXSS5
Hello and thank you for writing.
It certainly sounds like it could be a faulty door latch PS8770043, you should check for signs of damage, and replace as necessary. We hope this helps. Please contact us anytime if you require further assistance.
Not draining fully after recent washes. Previously I was able to turn on "drain "and it finished draining. Now, when I press "drain" the pump can be heard going but nothing coming out.
Am hoping it's a clogged hose somewhere and not pump.
For model number KUDE40FXSS5
Hi Bo, thank you for reaching out. Based on the description that you have provided, we would recommend making sure that the drain hose is not clogged. If the drain hose is clogged, the water will not drain from the dishwasher. Also, make sure that the pump filter is clean, as it may prevent the dishwasher from draining properly. If that is not causing the issue, then the issue is most probably with the drain pump, part number PS11753379, which may need to be checked. If the drain pump is faulty, you may need to replace it. We hope this solves your problem!
Hello,
Initially dishwasher didn't drain fully, but now doesn't fill with water. So far I've replaced the drain pump, overfill switch (because it was cheap) and fill valve. I can hear the pump trying to work but still no water incoming. Not sure if its the inlet pump or a control board issue?
Thanks! Doug
For model number KUDE40FXSS5
Hello Doug, Thank you for writing. If the Inlet Fill Valve was already replaced and did not fix the issue, you may have a faulty switch in the Door Latch or Control Board. Thank you for the inquiry, good luck with the repair!
Replacement was pretty easy after figuring out how to unsnap/unlock the old pieces. Tools only used to do a little prying and poking, but really aren't needed. Everything either snaps or slides together. Piece of cake
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough.
I took the broken basket adjuster off and then attached the new one. It wasn't too difficult, however some removal instructions and re-install instructions( or just a picture supplied) would have been helpful. This isn't an issue for a mechanically inclined person, but would be a challenge for someone that isn't. Thanks.
