This is an inlet/outlet bezel, also known as the air duct bezel, is for your dishwasher. It covers the vent openings in the dishwasher and prevents the dishwasher from leaking. It is gray in color and...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Glenna
March 29, 2023
seems like on lock/ no blue lights coming on, unable to reset it
For model number KUDD03STPA2
Hello Glenna, thank you for the question. To turn off Lock, press and hold ProDry for at least three seconds. When Control Lock is lit, all buttons are disabled. If this does not solve your problem and your dishwasher is getting proper power from the outlet, you may need to replace the control board, part number PS11751194. We hope that helps!
Fiddled around for a few minutes trying to fit the tabs in the holes. Finally figured out it just twisted to put it back on. Very simple but it looked more complicated that it was.
