This is an inlet/outlet bezel, also known as the air duct bezel, is for your dishwasher. It covers the vent openings in the dishwasher and prevents the dishwasher from leaking. It is gray in color and...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joseph
November 25, 2025
The locked, light stays lit. I have cut power to the machine by turning off the circuit breaker. But the light remains lit when the breaker is turned on. is there another fix?
For model number KUDD03DTSS3
Hello Joseph, thank you for getting in touch. You will need to turn off the controls lock “Locked” by pressing and holding the ProDry button for at least 3 seconds. Similarly, it can also be turned on the same way to avoid unintended use of your dishwasher, or cycle and option changes during a cycle. We hope this helps.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Randy
November 17, 2022
The controls of the lower drawer are dead. The upper drawer is operating normally. Is there a reset button somewhere for the drawer controls?
For model number KUDD03DTSS3
Hello Randy, thank you for the query. To reset the dishwasher, you will need to unplug the appliance for a few minutes and restart it. If that does not help, then either the control panel, part number PS11748545, is faulty or the wire harness, part number PS2326941, is damaged and needs to be replaced. If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Fiddled around for a few minutes trying to fit the tabs in the holes. Finally figured out it just twisted to put it back on. Very simple but it looked more complicated that it was.
