This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
These compactor bags fit most rectangular trash compactors. They feature a slip-n-grip design to keep the bags from slipping into the compactor. Made of 50% post-consumer recycled plastic.
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
December 14, 2023
The door is stuck,, I cant start the compacting because the door will not close all the way.
For model number KUCS180S1
Hi Jim, thank you for the great question. Based on our research, the issue is most probably with the drawer slide rails. The trash compactor drawer rides on rollers and rails. The drawer may be difficult to fully close if the rollers or bearings are not turning freely or if the rails are bent or sticky with old grease. Try cleaning and regreasing the drawer slide rails first to see if that allows the drawer to open and close more easily. If one or both of the drawer slide rails are bent or damaged, replace the drawer slide rail kit, part number PS354799, to solve the problem. Glad to be of help!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you
Since the belt broke, I had to put the cogged belt on the large driven pulley first, after loosening the four motor mount screws, and sliding the motor as close to the driven belt as I could. After several tries, I positioned the belt successfully on the driven pulley, then slipped it over the pulley on the motor. I pulled the motor as far away from the driven pulley to put proper tension on the belt without being excessive. I snugged the four motor mount bolts, tested the compactor and after a successful run, tightened the bolts on the motor mount. I then replaced the latch assembly, two screws and it was done.