This twenty-five watt microwave light bulb is two and a half inches long. It has a small, screw-in base and it carries 120V. This item sells in a quantity of one, though many microwaves require two.
$21.82
In Stock
Order within the next 5 hrs and your part ships today!
This set of two electronic control boards contains both the emitter and the receiver. These boards tells the icemaker when it's full and that it has to dump the ice, and it also tells the icemaker whe...
$491.08
In Stock
Order within the next 5 hrs and your part ships today!
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...
$47.43
In Stock
Order within the next 5 hrs and your part ships today!
Sold Individually. - * Part may differ in appearance, but functions same as original.
$31.13
In Stock
Order within the next 5 hrs and your part ships today!
Questions And Answers for KSSC42QVS01
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mauro
October 7, 2021
Hi, my water dispenser dispenses water very slowly. However, when I remove the filter, it is fine. I thought it was a clogged filter, but I changed 3 new filters, but still dispenses slowly. Do you know what is causing it? Maybe the intake valve? Thank you.
For model number KSSC42QVS01
Hello Mauro, Thank you for the question. This could be a weak valve. It can be tested with a Multimeter. Here is a link on information on testing the Valve. We hope this helps!
https://www.partselect.ca/Washer+test-water-valve+repair.htm
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours.
First I shut the water off to the refrigerator.then i pushed the big button in the middle of the grille below the refrigerator door. pulled out the old filter, took the front cap off the old filter put it on the new filter. took the two red caps off the new filter. pushed the filter in till it locked in place. all done! Turned the back on.