This is a heating element compatible with various makes of ranges and ovens and is sold as an individual part. Measuring 20.5-inches wide and 20.25-inches (with terminals) long, this heating element is a genuine OEM part. If your range is not heating during the bake setting, not heating evenly, or if the element is burnt out or damaged, t...Read morehe element will need to be replaced. This repair is simple and only requires that you disconnect your oven from the wall outlet and use an appropriate screwdriver to disassemble and replace the element with the additional support brackets to secure it.
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-o...Read moreut bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part. It is constructed of glass and metal and is sold individually. Depending on the appliance and location of the bulb within it, you may want to consider disconnecting power and using a flashlight for easier access to unscrewing and re-screwing in your bulb during this repair.
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
If your oven’s control panel is getting too hot or showing fan errors, this cooling fan might be the fix. It helps keep the electronics cool by circulating air behind the panel, which can prevent overheating and extend the life of your appliance. This part includes a hall sensor and replaces older fan models used in many Whirlpool, Kitche...Read morenAid, Maytag, and Jenn-Air ranges. It’s a great solution for issues like slow fan speed or unusual smells from the control area. Installation may vary depending on your model, so be sure to check your appliance’s layout before starting.
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
This oven temperature sensor is designed to monitor and regulate the internal heat levels of your range, ensuring consistent and accurate cooking performance. It communicates directly with the control board to adjust heating as needed. Over time, exposure to high temperatures can cause the sensor to degrade, leading to uneven heating or f...Read moreailure to maintain set temperatures. If your oven struggles to reach or hold the correct temperature, replacing the sensor may resolve the issue. This OEM replacement part includes a wire harness for connection and is installed using two mounting screws. Installation is simple and typically requires only a screwdriver. Please note that the sensor is sold individually and does not include additional hardware.
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the back of your range, so in order to access it you will need to remove the back panel. Many of our customers have rated this repair as easy, a...Read morend it should take less than 15 minutes. Before you begin this repair, make sure to disconnect the power source from your range. This is an OEM part sourced directly from the manufacturer.
This surface burner base is a crucial component for specific models of stoves, ovens, and ranges. It serves the important function of holding the orifice and directing gas to the burner head for efficient cooking. Made as a genuine OEM part, it ensures reliable performance and compatibility with your appliance. Before installing, ensure t...Read morehe gas supply is turned off and the burner is completely cool. Verify compatibility with your model before ordering, as variations in size or shape may exist. This part is sold individually.
Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pam - For model number KSDG950ESS1
March 6, 2020
I need child proof knob covers for my stove. Can you tell me where i can get 4 of them?
Hello, Thank you for your question. There are not child proof knobs unfortunately. Only the knobs that came with your appliance when you purchased it. You can check with the manufacturer directly to verify this. Once you hear back from them we would be happy to assist you further. We hope this helps.
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
JAMES - For model number KSDG950ESS1
October 9, 2023
convection fan motor not working
Hi James, thank you for contacting us. Based on the description, the issue is with the convection motor, part number PS12745419. We would recommend checking the convection motor to fix the issue. We hope this solves your problem!
Hi James, thank you for contacting us. We have attached some relevant instructions, which may not be of the exact same model but will help you while replacing the convection motor. In order to replace the convection motor. Open the oven door and remove the racks. Un-thread the convection fan assembly mounting screws and detach the assembly from the rear interior panel. Disconnect the wire connector. Prepare the new convection fan assembly for installation by transferring the cover from the old assembly to the new one. Connect the wire connector and align the assembly on the rear panel. Reassemble the unit. We hope this helps!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Norm - For model number KSDG950ESS1
November 8, 2025
Bottom element only getting 120 volts
Hi Norm, thank you for reaching out. We would suggest checking the bake element, part number PS11703285. You may need to replace it to fix the issue. We hope this solves your problem!
the conveation oven and regular oven only goes up to 325 degrees what part do i need range is only 5 years old
Hi Pete, thank you for reaching out. We would suggest checking the oven temperature sensor, part number PS11726314. Because if the sensor probe is damaged or dirty, it may send incorrect resistance signals to the control board, causing it to think it has reached higher temperatures or to shut down prematurely. Replacing it might fix the issue. We hope this solves your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
mice had made nests in the insulation wrap in the range
129 of 211 peoplefound this instruction helpful.
Wendy from Red Hook, NY
Easy
More than 2 hours
Screw drivers
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to
... Read more fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
Read less
Was this helpful?
Thank you for voting!
The oven would take an hour to preheat.
59 of 64 peoplefound this instruction helpful.
Helen from PURVIS, MS
Very Easy
Less than 15 mins
Screw drivers
First, we turned on broil and the upper element turned orange and obviously worked. We figured the bottom element went out. The diagram on this site showed a bottom heating element that looked nothing like ours, but after reading other reviews, and reading that part that goes through the back of the oven was in the middle, and not off to
... Read morethe side, we ordered this element. It was perfect. All you have to do is unplug the oven, take out the bottom pan covering the element by removing 2 screws in the back, remove the lower small cover on the back of the oven and then unplug the old element, unscrew the old element on the inside of the stove, then install the new element and put everything back like it was. Nothing to it. It worked like a charm and my oven now heats up fast again. Easiest appliance repair job ever!
Read less
Was this helpful?
Thank you for voting!
Socket Light had a bad thread
44 of 66 peoplefound this instruction helpful.
Edmund from Emporium, PA
Easy
15 - 30 mins
Pliers, Screw drivers
Socket Lite come with clips attached to the outside of the housing. After you unhook the 3 lead wires that are attached to the unit. All you have to do is push in on the clips and release the unit. Then you snap in the new unit. Attach the 3 wire leads, put a oven bulb in the socket end, and the install the light cove
... Read morer
My Orders
