This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
The lower door closing cam is used in refrigerator doors, it can be located on the fresh food side or the freezer side. It helps hold the door open. This cam is made out of plastic, so it might crack ...
This EveryDrop Filter5 is certified to reduce the most contaminants with Triple Filtration Technology. Now, you and your family can enjoy the enriching benefits of cleaner, freshly filtered ice & wate...
The Door Cam is a black plastic part which helps the door pivot shut while keeping the door and hinge in proper alignment. Lubricating this part upon installation may help it move easier. It attaches...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
***NOTE: Ice maker does NOT come with the bail or shut off arm. You must order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and th...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This is a genuine replacement light bulb for a refrigerator. The inside of your refrigerator should illuminate when you open the door. If your fridge does not illuminate, you may need to replace this ...
$65.98
In Stock
Questions And Answers for KSCS25FKSS02
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Penny
February 2, 2020
What is the cubic foot capacity of this model?
For model number KSCS25FKSS02
Hello Penny,
Thank you for your question. The cubic foot capacity for your model is 24.5 cu ft. We hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
February 22, 2020
Water dispenser drips and leaks water continuously when not in use. It is still doing this after the water filter has been replaced. Please advise on the proper repair.
For model number KSCS25FKSS02
Hello Jim,
Thank you for your question We have done an investigation into your model KSCS25FKSS02, we have discovered that the Water Tube Kit would be the most accurate cause of your symptoms. It is available under part number PS11730901. If there is a break in the water tube or it is obstructed in some way, it would cause a leak from your dispenser. We hope this helps you.
I'm looking for a replacement drawer for the Meat Locker. This refrigerator is 2004 model.
For model number KSCS25FKSS02
Hello Susan, thank you for getting in touch. The part you are looking for is part number PS11739020. If you need help placing an order, customer service is open 7 days a week!
Do I need a blank filter or a plug if I don’t want to use the water filter? Thank you for your help.
For model number KSCS25FKSS02
Hello Bethany, thank you for getting in touch. According to our research, your model does not come with any blank filter or bypass plug. You can run the dispenser without a water filter, but your water will not be filtered. You may need to remove the water filter and then slide the water filter cap from its end. After removing the filter, insert the water filter cap into the base grille until it stops. We hope this helps.
Was this helpful?
Thank you for voting!
Miyah
December 1, 2024
Hi I have the 2003 model and I can not figure out how to properly install the fridge drawers especially the last drawer ! Please help I’ve looked everywhere for a video !
For model number KSCS25FKSS02
Hi Miyah,
Thank you for your question. According to your owner's manual, to remove the drawers, slide the crisper or meat drawer straight out to the stop. Lift the front of the drawer with one hand while supporting the bottom of the drawer with other hand and slide the drawer out the rest of the way. To install the drawer, slide it back in fully past the drawer stop. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I backed out the 2 top screws about a quarter inch and then removed bottem screw with a quater inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection with a small screwdriver. The new Ice Maker was wired correctley for my refrigeator so all I had to do wea reconnect the power connection and mount new Ice Maker on the two top screws and install the bottem screw. It took e while for the new Ice Maker to start it's cycle but after it did, it worked GREAT. Part Select service was OUTSTANDING, ordered part one day and received the next. THANKS!!!!
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours.
Thanks to the pictorial diagram, I was able to order correct parts. It was just a matter of removal of broken parts and replacing them. Ice maker now working and air is no longer getting into freezer which was freezing up ice maker. Thanks for timely delivery, now I am able to use ice dispenser, which I haven't used for long time. Thanks