This Refrigerator Air Filter is a white 1.8x3.2" plastic filter which neutralizes odor and bacteria in the air. It should be replaced every six months at a minimum. Refer to your user manual and model...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This clear plastic door shelf bin is designed to fit a variety of refrigerator models, offering a convenient way to store food items within easy reach. Measuring approximately 12.5 inches wide and 2.5...
This auger motor is for refrigerators.
Auger motor turns the auger that pushes the ice cubes through the dispenser chute.
Safely store any food that could deteriorate while the power is off. Unp...
This water filter is a genuine replacement for bottom-freezer refrigerators that accept a Filter 2. it is certified to remove up to 24 different contaminants which include pharmaceuticals, waterborne ...
The Ice Maker Assembly includes the complete ice maker and housing for refrigerators. If ice cubes are smaller than usual, a new water filter may be needed. Unplug the refrigerator and store perishabl...
This refrigerator filter cap securely holds the water filter in place and makes it easy to remove when needed. Made from durable plastic in black or grey, it helps maintain a proper seal to support sm...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donna
February 22, 2026
I need to replace the water filter cap and am unsure which one will fit my refrigerator. Can you help me? Thank you.
For model number KRFC704FPS05
Hello Donna, thank you for contacting us. The water filter cap for your model is part number PS12349464. Glad to be of assistance!
The shelf frame in my refrigerator is cracked and I need a replacement but I can’t tell which is the right one. KRFC704FPS05 it’s the primary shelf just above the cheese/tray drawer.
For model number KRFC704FPS05
Hi Meredith, thank you for reaching out. The crisper cover frame for your model is part number PS12346853. We hope this is what you were looking for!
Hello Jill, thank you for reaching out. It seems the child lock feature is enabled. If the child lock feature is enabled, the control panel will be unresponsive to button presses because all controls are disabled to prevent accidental use or changes. Press the Cubed Ice button for three second to disable. If this is not the case, then the user interface board might need to be replaced, the part number is PS16660588. We hope this solves your problem!
Purchased new motor from Partselect.com. When it arrived it came with a new rubber washer that fitted on top of new motor that was not on old motor, that how water got into old motor. However, the instruction sheet did not give info on how to access the proper way to the motor that is the door. Not wanting to damage the freezer door assy. called in a tech who made it look easy, but even he had a little problem locating access panel that was directly under the motor in the freezer side of the door. After that it was a piece of cake.
Removing the old unit was difficult. The light was clearly designed for installation not for ease of repair. Since I was concerned about marring the surface of the refrigerator I used a paint scraper to get under the lip of the light and another smaller paint scraper to lift the unit away from the body of the refrigerator. It does not just "pop off". I eventually did get it free without any damage to the wall of the refrigerator. The repair was then very easy. There was a connector that was easy to separate allowing for the removal of the old unit without cutting any wires. The new unit had a mating connector, which easily connected to the old connector in the refrigerator. After some pushing I was able to install the new unit into the hole in the refrigerator. It does not exactly "snap in".
researched on line and found the wiring was in series and I the suggestion was to replace the first light in the series that was in the freezer. Ordered the replacement light board and took out the existing light and pooped in the new one. Lights now all work! 15 minutes at tops.
