This Refrigerator Air Filter is a white 1.8x3.2" plastic filter which neutralizes odor and bacteria in the air. It should be replaced every six months at a minimum. Refer to your user manual and model...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This clear plastic door shelf bin is designed to fit a variety of refrigerator models, offering a convenient way to store food items within easy reach. Measuring approximately 12.5 inches wide and 2.5...
This mounting screw is a genuine OEM replacement part for the door handle in your refrigerator. If you are having trouble shutting the refrigerator door, or opening it, replacing this screw can help s...
This auger motor is for refrigerators.
Auger motor turns the auger that pushes the ice cubes through the dispenser chute.
Safely store any food that could deteriorate while the power is off. Unp...
This water filter is a genuine replacement for bottom-freezer refrigerators that accept a Filter 2. it is certified to remove up to 24 different contaminants which include pharmaceuticals, waterborne ...
Having trouble with temperature regulation in your refrigerator? The Whirlpool THERMISTOR refrigerator/freezer thermistor kit could be just the solution you need. Tailored to fit select Whirlpool, Kit...
The board fits behind the light lens and has LED lights that illuminate the interior of the refrigerator or freezer compartments.
$251.61
In Stock
Questions And Answers for KRFC704FPS01
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carhi
May 1, 2023
Hi,
I need a replacement bin for the freezer door side of my Kitchen Aid refrigerator. The part number on the bin itself is W10671656 2 >GPPS<. Will you please advise me as to which part I need?
For model number KRFC704FPS01
Hello Carhi, thank you for reaching out. According to our research, the door shelf bin, part number PS11765673, is compatible with your model. We hope this is what you were looking for!
How do I remove the water filter and install a new one.
?
For model number KRFC704FPS01
Hello Joanne, thank you for contacting us. To remove and install a new water filter in your model, you may need to follow these steps:
1. Open the filter cover.
2. Turn the filter counterclockwise to remove it from the housing.
3. Insert the new filter into the filter housing.
4. Turn the filter clockwise until it stops and snap the filter cover closed.
5. After installing the new filter, flush the water system.
We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Purchased new motor from Partselect.com. When it arrived it came with a new rubber washer that fitted on top of new motor that was not on old motor, that how water got into old motor. However, the instruction sheet did not give info on how to access the proper way to the motor that is the door. Not wanting to damage the freezer door assy. called in a tech who made it look easy, but even he had a little problem locating access panel that was directly under the motor in the freezer side of the door. After that it was a piece of cake.
Unplugged and empty refrigerator, completely defrosted refrigerator using a hair dryer to speed up the defrosting, put a lot of towels on the floor to soak up the water when the ice melts. Removed all refrigerator racks and drawers, then remove the white plastic and styrofoam condenser cover. You will then see the thermistor, cut the two small wires connecting the thermistor to the harness leave yourself as mush wire as possible. Splice in the new thermistor and put the refrigerator back together.
Removing the old unit was difficult. The light was clearly designed for installation not for ease of repair. Since I was concerned about marring the surface of the refrigerator I used a paint scraper to get under the lip of the light and another smaller paint scraper to lift the unit away from the body of the refrigerator. It does not just "pop off". I eventually did get it free without any damage to the wall of the refrigerator. The repair was then very easy. There was a connector that was easy to separate allowing for the removal of the old unit without cutting any wires. The new unit had a mating connector, which easily connected to the old connector in the refrigerator. After some pushing I was able to install the new unit into the hole in the refrigerator. It does not exactly "snap in".
