This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This is a replacement end cap for your refrigerator pantry drawer. The pantry drawer has an endcap on either side, which encloses the drawer. This end cap is for the left side of the pantry drawer onl...
This water filter bypass cap is a genuine OEM component designed for select Whirlpool, Maytag, KitchenAid, and affiliated refrigerator models. Installed in place of the water filter, it allows uninter...
This part is the replacement for the end cap on your refrigerator pantry drawer. Your pantry drawer will have two end caps; one for the right side and one for the left. This is the end cap for the rig...
Need more space in your fridge door or dealing with a cracked bin? This shelf bin is a quick and easy fix. It’s made from sturdy plastic and is perfect for holding condiments, drinks, or small items. ...
Keep your fridge running efficiently with this easy-to-install door gasket. It helps seal in cold air and keep warm air out, so your food stays fresh and your energy bills stay low. The flexible gray ...
Keep your fridge organized and your food fresh with this pantry drawer cover. It’s the clear and white plastic piece that fits over the front of the drawer and helps keep the temperature steady inside...
This is a genuine replacement light bulb for a refrigerator. The inside of your refrigerator should illuminate when you open the door. If your fridge does not illuminate, you may need to replace this ...
This part helps keep your fridge at the right temperature by controlling how much cold air flows in from the freezer. If your fridge feels too warm, too cold, or makes strange noises, this damper migh...
$164.98
In Stock
Questions And Answers for KRFC302ESS00
Ask our experts a question about this model and we'll get back to you as soon as possible!
19 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alex
June 25, 2021
How to remove the ice maker?
For model number KRFC302ESS00
Hello Alex, Thank you for the question. Make sure you turn the power off going to the appliance. Once you have the power off you can look on the underside of the Ice Maker and remove the screws holding it to the Mounting Bracket. Once removed from the bracket, you can unplug the Wire Harness and pull the Ice Maker out. We hope this helps!
The plastic window on the Deli Center drawer is cracked. How do I remove it?
For model number KRFC302ESS00
Hello Andrea, thank you for asking. According to our research, you just need to depress the tabs from the bottom that hold the front pan in place. We hope this helps!
Was this helpful?
Thank you for voting!
IRINA
June 3, 2024
Does it have air filter?
If yes, where it located?
Thank you
For model number KRFC302ESS00
Hi Irina, thank you for reaching out. Based on our research, this model does not have an air filter. We hope this information helps!
Was this helpful?
Thank you for voting!
Rose
July 24, 2025
The hook that hold the water filter close broke. Can this part be replaced? Please advise. Thanks
For model number KRFC302ESS00
Hi Rose, thank you for contacting us. The hook comes attached to the water filter head, part number PS12712109. You may need to replace it to fix the issue. We hope that helps!
Icemaker wire would not go all the way down. Removed unit and end panel and discovered that cycle had not completed to allow wire to move down. Moved motor and moved shaft to allow wire to drop to start position. Reinstalled unit but still not working. Is it a motor issue?
For model number KRFC302ESS00
Hello Alan, thank you for getting in touch. An ice maker stuck in this position often indicates it's in the middle of a harvest cycle, preventing manual lowering. To resolve this, make sure freezer temperature is sufficiently cold. Clear any jams or ice build-up around the ice maker. If this does not help, you will need to replace the icemaker assembly, part number PS11769197, to fix the issue. We hope this helps.
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady thought process on the problem helped disengage the darned old filter!
