This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
The crisper drawer in your refrigerator is used for storing various items. If you notice that your current crisper drawer is damaged, you may need to replace it. You may notice that your refrigerator ...
This replacement end cap supports the pantry drawer on the right side of your refrigerator, helping it slide and stay in place properly. It mounts to the inside wall and is essential for keeping the d...
The pantry drawer lid helps keep everything inside the drawer, it acts as a cover and keeps your drawer at the proper temperature by creating a seal. If the door will not open or close, or if the draw...
This left-side pantry end cap, also referred to as a drawer support or door shelf trim, is designed to secure items on the interior door shelf of your refrigerator. Sold individually, it snaps into pl...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
If your fridge door is sweating or hard to open and close, the gasket might need replacing. This gray magnetic gasket helps seal the door tightly to keep cold air in and warm air out. It runs along al...
This water filter bypass cap is a genuine OEM component designed for select Whirlpool, Maytag, KitchenAid, and affiliated refrigerator models. Installed in place of the water filter, it allows uninter...
Running out of space in your fridge door? This clear, shallow bin is perfect for organizing jars, bottles, and small items. It’s made from sturdy plastic and fits right into the door—no tools needed. ...
If the door shelf bin in your refrigerator is cracked, missing, or no longer holding items securely, this clear plastic replacement bin may be just what you need. Designed to fit inside the refrigerat...
$84.50
In Stock
Questions And Answers for KRFC300ESS07
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sonya
February 5, 2025
Is there an air filter in this refrig? We replaced water filter but didn’t know if an air one and where ?
For model number KRFC300ESS07
Hi Sonya, Thank you for writing. Researching this model is does not show it comes equipped with an Air Filter. Let us know if you have further questions!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Rick
May 7, 2026
Compressor run for a couple of seconds and stop, then run again and stop , I change start relay and capacitor 5 mos ago, then it happened again compressor on and off several times . Do you think compressor issue or mother board.
For model number KRFC300ESS07
Hi Rick, thank you for contacting us. Since you have already replaced these parts, we would suggest checking the compressor, part number PS16744514, before replacing the control board. We hope this sorts out your problem!
I need new gaskets for the my French door refrigerator, not sure what to part order. Do they come as a pair or individual? Thank you
For model number KRFC300ESS07
Hello Ione, thank you for the question. The gasket you are looking for is part number PS11759515. It is sold individually and will fit both doors, right and left. We hope this is what you were looking for!
Hello, I’m looking to purchase a start relay switch for our fridge. I can’t seem to locate it on your website, can you please advise.
Thanks,
For model number KRFC300ESS07
Hello Allison, thank you for reaching out. The start device you are looking for is part number PS16620501. If you need help placing an order, customer service is open 7 days a week!
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady thought process on the problem helped disengage the darned old filter!
Removed door and crisper pans. Removed nuts on left end cap - think there were 3. Removed nuts on right end cap and one or two on back air regulator attached to right end cap. Replaced left end cap with new one using reserved nuts. Carefully removed back air regulator from right end cap. Attached back air regulator to new right end cap. Replaced right end cap and back air regulator and attached with nuts. Carefully inserted pantry door into pin on one side and slightly bent both right and left pins to insert door fully into end caps. Replaced crisper pans. That's it.
