This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
This broiler pan and roasting rack set features a two-piece design that allows fat to drain away for cleaner cooking and reduced splatter. Made with a durable, high-heat resistant porcelain finish, it offers reliable performance and easy cleanup. Measuring approximately 16 3/4 inches long by 12 3/4 inches wide and 1 3/4 inches high, it provides a practical solution for everyday broiling and roasting.
If your oven isn’t heating properly or seems to be getting too hot, the high-limit thermostat might be the issue. This part helps keep things safe by shutting off the heat if the temperature gets too high. It’s built to last and helps protect your oven from damage. Replacing a faulty thermostat can fix problems like uneven cooking or an o...Read moreven that won’t start. Just be sure to unplug the oven before installing the new part.
Support cookware securely inside a compatible oven with a replacement wire rack. Replacement may be needed when the original rack is warped, corroded, missing, or no longer slides smoothly along the side guides. First, clean baked-on residue from the rack and guide rails because heavy buildup can restrict movement. Check that the oven lin...Read moreer and supports are not bent. Verify compatibility with the full appliance model, since racks for similar ovens may differ in size and stop placement. Work only when the oven is turned off and completely cool. Install the rack evenly on matching guides, avoid overloading it, and remove it during self-cleaning unless the owners manual says otherwise.
A worn oven-door seal can allow extra heat to escape while food is cooking. This replacement gasket forms a barrier around the oven opening when the door closes. Check for broken clips, loose sections, burns, tears, or areas that no longer spring back after being pressed. Before replacing the gasket, make sure the door closes evenly and t...Read morehe hinges are not bent or loose. Disconnect power and wait until every surface is cool. Wear gloves to protect your hands from sharp edges. Follow the service diagram when releasing the old fasteners, then seat the new gasket evenly without using unapproved glue or sealant.
If your oven rack is bent, missing, or just not sliding like it used to, this replacement rack is a great fix. It glides smoothly in and out, making it easier to check on your food or remove hot dishes safely. Designed for wall ovens, combo units, and ranges, it helps restore your oven’s full cooking potential. Just make sure it matches your model before installing.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chuck - For model number KODE500ESS02
February 21, 2020
When the oven is turned on the display say preheating but nothing happens, there is no error code displayed. It looks just like it is working with no heat, i changed the thermal overload already.
Hello Chuck,
Thank you for your question. If you have checked your oven and it seems to be running properly, but there is no heat we would recommend checking your element under part number PS11756151. Typically that would be next. However, checking with a multi meter to check for a break in connection would ultimately be the best way to check which part is causing you to not get your desired heat. We hope this helps you.
How do i change the language on the display from french to english?
Hello Roberto, thank you for your question. The Tools selection key allows you access to 9 hidden functions within the Electronic Oven Control. These hidden functions allow you to set the clock, change the oven temperature between Fahrenheit and Celsius, turn the audible signals and prompts on and off, and adjust the oven calibration, change the language, and turn on the Demo Mode.
The Sabbath Mode is also set using the Tools selection key.
To Use: Touch CLOCK/TOOLS. The oven display will scroll
through the various tools, starting at "1" and ending automatically
at "9." You can also touch the Tools key repeatedly to manually
scroll through the list of tools.
1 Clock
2 Fahrenheit and Celsius conversion
3 Sound On/Off
4 Sound High/Low
5 End tone On/Off
6 Calibration
7 Sabbath
8 Language
9 Demo Mode
Was this helpful?
Thank you for voting!
Jimmy - For model number KODE500ESS02
January 30, 2023
What’s the difference in a 00,01,02 etc
Hello Jimmy, Thank you for the question. The last two digits of the model number normally refer to the color of the appliance. We hope this information helps!
Was this helpful?
Thank you for voting!
Kenneth - For model number KODE500ESS02
March 11, 2026
I need bottom door part number
Hi Kenneth, thank you for getting in touch. The lower oven door for your model does not come as an assembly. It comes in parts. We have attached a link to the door parts through which you can order the required parts. We hope that helps!
Our display board says "error code err f1e0 display board". It does not work. Can someone please help support this appliance
Hello Benjamin, thank you for your question. Try unplugging the unit or turning the power off at the breaker and leave it for about 5 minutes. If the error continues the main control board should be replaced which is PartSelect Number: PS12348595. I hope this helps.
Was this helpful?
Thank you for voting!
Prev
1
Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
faulty meat probe
38 of 69 peoplefound this instruction helpful.
Kent from Seattle, WA
Really Easy
Less than 15 mins
Not a repair. Just needed to replace the meat probe sensor for the programmable oven. Quick and easy purchase and very fast delivery took care of the problem. I was back in business.
Was this helpful?
Thank you for voting!
Scratches in Surface
83 of 228 peoplefound this instruction helpful.
Michelle from Richardson, TX
Really Easy
Less than 15 mins
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.