This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This oven rack is chrome in color and is approximately 24.76 inches wide by 15.78 inches deep. If your old oven rack is damaged, you should consider replacing it. Many of our customers have determined...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This part is the replacement door gasket for your oven. It is made of gray rubber and is sold individually. The door gasket runs along the circumference of the oven door and creates a seal that insula...
$40.94
In Stock
Questions And Answers for KGRA806PSS02
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Corinna
February 17, 2020
My oven will not shut off when the off button is pressed. There is no beep when it is pressed. Thanks
For model number KGRA806PSS02
Hello and thank you for writing.
If the oven continues to heat after it is turned off, the control board PS11747372 is likely defective. If the control board is defective, replace it. Sometimes. If the bake burner electrode PS11747275 has failed, the oven will not turn off. You also need to check the gas valve assembly PS11747403. We hope this helps. Please contact us anytime if you require further assistance.
The brass nozzle for the top burner in the oven is a m54. Should that be changed to a different one when converting to propane? What nozzle would it be if i had to?
For model number KGRA806PSS02
Hello and thank you for writing.
The orifices need to be changed when converting to propane, so does the regulator. The conversion kit for your unit is PS974549. We hope this helps. Please contact us anytime if you require further assistance.
My daughter picked up this stove used, how do i know if it's set up for natural gas or propane?
For model number KGRA806PSS02
Hello and thank you for writing.
The serial tag and rating plate contain the gas type information, either natural gas (NG) or liquid propane (LP). If a gas product is converted to the other type of gas, a sticker is placed near the original serial tag and rating plate to indicate the gas type change. We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Robert
November 4, 2021
The oven light will not turn off. Light stays on all the time.
For model number KGRA806PSS02
Hello Robert, Thank you for the question. This could indicate the door is not closing properly or the switch in the Door Lock is defective and the Lock may need to be replaced. We hope this helps!
Where can I get the specs and features of my Kitchen Aid Gas Stove with model # KGRA806PSS02??
For model number KGRA806PSS02
Hello Marco, thank you for contacting us. According to our research, your model has a 600-15000 BTU triplet burner, 12500 BTU power burner for quick cooking, and two 6000 BTU simmer burners. The capacity of the oven is 3.6 cubic feet. It has a self-cleaning feature. It has a sabbath mode which makes it possible to use the range without having to turn it on. The dimensions of your model are approximately:
Height: 43 7/8 inches.
Width: 30 inches.
Depth: 27 inches.
We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I searched similar problems on the web and learned that a whole lot of people have Kitchenaid stove with the same problem. They all stated that the thermostat burns when self cleaning. Since technician wanted $190.00, I decided to change it myself. The part cost me $40.00. To instal the thermostat, I removed the panel at the back of the stove and the thermostat is attached with two wires. After I replaced the thrmostat, the screen panel came on and I was able to open the door. I am posting this to tell people that anyone can do this.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
The repair was easy, I used one screw driver and that was it, less than an hour. Part worked great! Before I repaired the oven, I was told by a service tech. the repairs would cost $693, I repaired myself for $166 tnru part select . Using a Philips head driver I unscrewed two screws holding the front panel onto the stove, unplugged the control panel. Unscrewed the mother board pulled old membrane switch out replaced it with new. Its that easy. Then reverse the process.