This Refrigerator Air Filter is a white 1.8x3.2" plastic filter which neutralizes odor and bacteria in the air. It should be replaced every six months at a minimum. Refer to your user manual and model...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your prod...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This genuine OEM replacement part is a water filter for your fridge or freestanding ice maker. The filter is used to remove contaminants and particles from the water, to ensure a clean and fresh taste...
This mounting screw is a genuine OEM replacement part for the door handle in your refrigerator. If you are having trouble shutting the refrigerator door, or opening it, replacing this screw can help s...
This ice maker assembly is for refrigerators. Ice maker assembly contains the complete ice maker and housing. The assembly may include multiple parts; refer to your parts diagram for a complete list o...
This screw is a little under an inch long and is made of metal. It is used with a refrigerator's ice maker assembly. Sold individually.
$9.89
In Stock
Questions And Answers for KFIV29PCMS03
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thedious
December 16, 2019
When reading the tech data sheet, to enter the "service diagnostic mode" on my refrigerator, it says to hold sw1 and sw2 for 3 seconds. Where are these switches located? I can't find them anywhere.
For model number KFIV29PCMS03
Good Day Thedious. Thank you for your question in regards to your unit (Model Number KFIV29PCMS03). We do apologize but we were not able to locate the information you requested. For more specialized assistance or to speak with someone about this, we recommend calling the manufacturer of the equipment directly. They can be reached at by phone by calling 800-541-6390.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michael
March 2, 2020
How do i change the light bulbs in the fridge?
For model number KFIV29PCMS03
Hello Michael, thank you for your question. There are no bulbs to replace in the fridge, they are LED light modules which are PartSelect Number: PS12348265. These parts can be released from the fridge by depressing the tabs and removing from the slot. Unplug the wires, and reconnect the new module and snap it back into place. I hope this helps.
Was this helpful?
Thank you for voting!
Cynthia
May 25, 2023
Hi do
You carry the replacement vegetables drawers, there are two side
To side .. if so
Can you give me the part number or name so I can order
For model number KFIV29PCMS03
Hello Cynthia, Thank you for writing. The Left Drawer is Part #: PS12349582 and the Right Side is Part #: PS11731423. We hope this helps!
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Purchased new motor from Partselect.com. When it arrived it came with a new rubber washer that fitted on top of new motor that was not on old motor, that how water got into old motor. However, the instruction sheet did not give info on how to access the proper way to the motor that is the door. Not wanting to damage the freezer door assy. called in a tech who made it look easy, but even he had a little problem locating access panel that was directly under the motor in the freezer side of the door. After that it was a piece of cake.
An easy job for smaller hands. Removed the two bolts holding the light cover. Removed two electrical connections from the old switch by pinching the retaining clip,removed the switch, snapped in the new one and re-attached the connectors. Your online illustrations helped me to know that the plastic housing for the light switch would only swing down so far and was not intended to be removed. Saved me from breaking that plastic cover's tabs. This home repair saved me more than 5 times the cost of hiring a professional to do it. Very happy homeowner.