This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
$35.26
In Stock
Order within the next 5 hrs and your part ships today!
This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when y...
$14.15
In Stock
Order within the next 5 hrs and your part ships today!
These parts will attach to your drawer rail and are used to help the drawer glide smoothly.
$31.42
In Stock
Order within the next 5 hrs and your part ships today!
Questions And Answers for KFIL27CXMS3
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jeffrey
June 9, 2022
This refrigerator works fine until the ambient temperature/humidity change. Usually the temperature goes above the setpoint and over 40 f and approaches 50f. I fix the issue temporarily by going to my circuit breaker panel and turning off the refrigerator circuit for a couple of seconds. Something in the refrigerator resets and the temperature starts dropping back below 40 f and usually stops in the mid-30s. Is there some circuit board or component that can be replaced so i do not have to cycle my circuit breaker?
For model number KFIL27CXMS3
Hello Jeffrey, Thank you for your inquiry. We have researched the model number that you have provided and the control board that controls the temperature is part# PS11750687. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
It appears the fridge has a bad water valve. The water dispenser does not work and the ice bin is getting low after several days. Normally we can hear the ice maker doing its thing during the day and at night, but not anymore. The water dispenser stopped working as a glass was filling. Sound like the valve?
For model number KFIL27CXMS3
Hello Ed, thank you for reaching out. We have concluded that the issue is with the water inlet valve, part number PS11738654. We hope this solves your problem!
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady thought process on the problem helped disengage the darned old filter!
