This is the replacement large surface element for your cooktop or range. It is approximately 10-inches in diameter and is 1200/2500 watts. The large surface element is installed under the cooktop and ...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This broil element is a genuine replacement part designed to deliver high heat for broiling in compatible Whirlpool, KitchenAid, Maytag, Amana, and Jenn-Air ovens. Located at the top of the oven cavit...
This single oven rack is used to provide a durable surface for your cookware inside the oven for baking/broiling. The oven rack measures approximately 24.76” x 15.78”, is made of metal and is chrome i...
This 120-130 volt 15-watt light bulb is used to illuminate the interior part of the oven cavity when the door is open or when the light switch is turned on. The bulb has a small screw base and is appr...
This surface element is for ranges.
The surface element supplies the heat to a cooking area on top of the range.
Unplug the range or shut off the house circuit breaker for the range before insta...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This part is the replacement door gasket for your oven. It is made of gray rubber and is sold individually. The door gasket runs along the circumference of the oven door and creates a seal that insula...
$57.27
In Stock
Questions And Answers for KERA807PSS00
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dori
February 27, 2020
I need to replace the glass cooktop for this stove. Unfortunately the replacement part (wp9759983bl) is no longer available anywhere. Is there another top that would be compatible with this model?
For model number KERA807PSS00
Hello Dori, Thank you for the question. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. We hope this helps!
Was this helpful?
Thank you for voting!
Connie
November 2, 2024
Where do we find the model number of our range? The manual has seven model numbers on the front cover.
For model number KERA807PSS00
Hello Connie, thank you for your question. To find the model on the range, open the bottom drawer, and look on the front face of the cabinet for a plaque or tag. We hope this helps.
Was this helpful?
Thank you for voting!
Joe
January 18, 2020
My front dual burner glass top range doesn't work every time. When you turn it on some times it comes on and works, sometimes it comes on works for a few minutes, and sometimes the light at control knob comes on and starts pulsating and the burner will not heat up. This problem just started two weeks ago and is know to get to the point of not working most of the time. What part will fix this problem?T
For model number KERA807PSS00
Hello and thank you for writing.
It certainly sounds like it could be a faulty dual infinity switch PS11747156, you should check for signs of damage, and replace if necessary. We hope this helps. Please contact us anytime if you require further assistance.
Something Kitchen Aid wont tell you but running a self clean on this model stove blows the fuse located on the back of the stove.
First I slid the stove out and removed the back of the stove held in place by 8 Phillips screws. The thermostat fuse is located near the top middle on the back of the stove. Remove the 2 screws holding it in place. Disconnect the wires, plug in the new part. Put it all back together. Job done in less than 30 minutes.
This repair would have cost $164 through A&E factory service.
