This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
This broil element is a genuine replacement part designed to deliver high heat for broiling in compatible Whirlpool, KitchenAid, Maytag, Amana, and Jenn-Air ovens. Located at the top of the oven cavity, it provides direct radiant heat essential for broiling food evenly and efficiently. Constructed from corrosion-resistant materials, it is...Read more engineered to withstand high temperatures and ensure long-term performance. A malfunctioning broil element may result in no heat, low heat, or uneven cooking. Replacing the element restores proper broil functionality and improves cooking results. Installation requires basic hand tools and should be performed with the appliance unplugged or the circuit breaker turned off. Instructional videos are often available to guide the process.
This single oven rack is used to provide a durable surface for your cookware inside the oven for baking/broiling. The oven rack measures approximately 24.76” x 15.78”, is made of metal and is chrome in color. This oven rack is a genuine OEM part and is sold individually.
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
When your beloved appliance stops working, we understand the frustration. One possible culprit might be your Whirlpool Thermal Fuse 105C. This vital little piece acts as a guardian for your oven, protecting it from damage caused by overheating or electrical shorts. This OEM-certified part works perfectly with many Whirlpool models, as wel...Read morel as certain KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef stoves, ovens, and ranges. Before installing, make sure to disconnect the oven's electrical power and put on some work gloves for safety. We strongly advise checking to make sure this thermal fuse is the right fit for your specific model before buying. With this quality replacement part, you can help restore your appliance to its former glory'working like new and ready to handle your cooking needs once again!
This is a replacement light bulb to illuminate the inside of your oven. It is 25 watts and 120 volts. Please wear gloves during replacement if your existing bulb is shattered. Consider ordering a spare as this is a common wear part.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Julie - For model number KEBK101SSS04
October 17, 2022
Our oven is still working fine but is making lots of noise, particularly after use as it is cooling. The noise is sort of a squeaking, bird chirping sort of a noise.
It also seems to be hotter than before on the front/door of the oven. The oven is 11 years old but hoping it has a few more years of life.
Hi Julie, thank you for asking the question. According to our research, the issue is probably with the fan blower, part number PS11745910. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Oven gets to temp then drops back down restart the oven and it shows temp and then the temperature drops again by 150 degrees have replaced element and fuse. Is it the control board?
Hello Evan, thank you for the question. Based on our research, the issue could be caused by a faulty temperature sensor, part number PS11748765. It measures the temperature inside the oven. If replacing it does not help, we would recommend replacing the control board, part number PS11752581. Please reach out to customer service if you need help placing an order. Glad to be of help!
Oven gets to temp then drops back down restart the oven and it shows temp and then the temperature drops again by 150 degrees have replaced element and fuse. Is it the control board?
Hi Evan, thank you for reaching out. You have checked almost every part related to this issue, we would recommend checking the following parts to fix the issue: the temperature sensor, part number PS11748765, the thermal fuse, part number PS11745932, and the control board, part number PS11748563. We hope this information helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
My broiler elerment is only recieving 120 watts to the outer element and 60 watts to the center element. The outer element glows red when on broil but the interior element doesnt. Is there a part that regulates wattage to the broiler element?
Hi Mark, thank you for getting in touch. You will need to replace the broil element, part number PS11747304, to fix the issue. Glad to be of help!
THANKSGIVING DAY!!! Oven has power but will not heat up!!!
Hi L, thank you for reaching out. If your oven has power but is still not heating, the issue might be with the temperature sensor, part number PS11748765. It monitors the temperature inside the oven cavity in order to maintain an accurate temperature. If the temperature sensor is faulty, the oven may not heat at all. You may need to replace it to fix the issue. We hope this helps.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Burned terminal block and filter board
95 of 208 peoplefound this instruction helpful.
Joseph from Decatur, GA
Easy
30 - 60 mins
Nutdriver, Screw drivers, Socket set, Wrench set
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem.
Was this helpful?
Thank you for voting!
The broiler element in my wall oven burned out
34 of 36 peoplefound this instruction helpful.
David from Catonsville, MD
Easy
15 - 30 mins
Pliers, Screw drivers, Wrench set
This was easy and I'm glad I didn't go to the trouble and expense of hiring an appliance repair person. I'm reasonably handy, but I really have no experience in this kind of repair. I'd like to mention that the part I ordered arrived in just two days and it was exactly the right part, so I was very pleased in that regard.
Aft
... Read moreer turning off the circuit to the wall oven and confirming that the power was off, I had to remove the oven from the wall in order to access the wires and connections in the back. Normally, this wouldn't have been necessary because usually the broiler element can be disconnected from the clasps that connect it to the electric source by simply unscrewing the defective element from the roof of the oven, pulling gently on the connection ends from inside the oven cavity in order to "pull out" an inch or two of the electric source wires and the metal clasps that accept the "male" connecting ends of the broiler element. Once the a bit of the wire and the metal connecting clasps are exposed and able to be held with pliers, the element can be disconnected from the connector clasps by simply pulling on the prongs of the element (hard).
But in my case, one of the metal connecting clasp for one of the wires had melted, presumably when the element burned out, and that clasp could only be accessed and replaced from the back of the oven. Also, I would imagine that the wires and clasps could "slip" back behind the unit when they're disconnected if that's not done carefully. However, removing the wall oven was pretty easy for me -- even as a one-person job. I just put a tall table in front of it and slid it out so that it rested on the table.
If you have to replace a metal connector clasp, they're inexpensive and available in the electrical departments of hardware/home stores.
In my case, there's a metal panel at the back of the oven that had to be unscrewed and removed so that I could access the areas where the electrical source wires connect through the back wall of the oven to the broiler element. This was just a matter of removing a few screws and then removing the metal panel.
Once the metal panel at the back of the oven was removed, I was able to replace the melted connection clasp by using a wire cutter/stripper and then pliers to secure the clasp on the end of the exposed wired by deforming the clamp with the pliers. Once that was done, I simply removed the screws that held the broiler element to the top of the oven cavity, disconnected the remaining three clasps that connect the element to the source wires (the fourth clasp was the one that had melted and that I'd replaced), removed the defective element, inserted the four "male" prongs of the broiler into the four clasps that connect them to the source wires, replaced the metal panel at the back of the oven, screwed the new element back into the top of the oven, slid the oven back into the wall cavity, turned the circuit back on, crossed my fingers, and everything worked like a charm.
I saved a money, but more importantly (for me) I saved a lot of time that I would have had to have spent waiting around for a repair person.
Read less
Was this helpful?
Thank you for voting!
Replaced our oven racks, becasue I (the husband) forgot to remove them before the "Self-Clean" process and they turned colors just as the instruction manual said they would !!
28 of 35 peoplefound this instruction helpful.
Kevin from Joliet, IL
Really Easy
Less than 15 mins
Easy, pulled out the old dis-colored racks and slid the new ones in. I was VERY happy with the quick receipt of my order. If I ever need parts again,this is where I will go