This OEM Dishwasher Upper Rack Adjuster is a grayish-black, plastic part which will require a screwdriver to install. It fits onto the dishwasher rack and connects it to the track allowing it to slid...
This gray plastic lower dishrack roller is a part for your dishwasher. It attaches to the bottom of the lower dishrack, allowing it to move in and out smoothly. If the lower dishrack stops moving in a...
Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
Also known as rack adjuster. Sold individually.
This is an original part from KitchenAid, Kenmore, Whirlpool, Jenn-Air, and Maytag for use with Dishwashers. The dishrack adjuster arm positioner clip...
This part is the replacement door seal for your dishwasher. It is approximately 22 inches long and 2 inches wide. This door seal is made of gray plastic and is found at the bottom the dishwasher. The ...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
Sold individually.
This dishrack adjuster is for dishwashers.
Dishrack adjuster lets you change the height of the dishwasher's upper rack.
Wear work gloves to protect your hands when installing this part.
$58.76
In Stock
Questions And Answers for KDTE204ESS0
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
KELLY
April 13, 2023
My dishwasher is working sporadically. It functions normally for about 5 or 6 times and then on the next use, it starts and runs for about one minute and then stops and makes a clicking sound. If I cancel the cycle and start it over
3-5 times, it will usually work again. What could be causing this issue?
For model number KDTE204ESS0
Hi Kelly, thank you for reaching out. We have researched and found the issue is most probably related to the control board, part number PS11731272. We hope this sorts out your problem!
Have to reset DW by unplugging and re-plugging after each wash. Is the main board about to fail? If so, do you sell a main board for this model? Serial # is
F51805536.
For model number KDTE204ESS0
Hello Nancy, thank you for the query. If you have to reset your dishwasher after each wash cycle, then your control board is failing. You may need to replace the electronic control board, part number PS11731272, to fix the issue. We hope this helps!
Can you purchase just the wheels for the lower rack? Just need 3 of them
For model number KDTE204ESS0
Hi Karen,
Thank you for your question. The wheels can be purchased separately from the lower dishrack. The wheels are sold as an assembly. The part number for the lower dishrack wheel assembly is PS11750057. To place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps!
Need clips that attach dishwasher to cabinets on both sides
For model number KDTE204ESS0
Hello Al, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS1487167 for the Side Mounting Bracket Kit. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
What is the part#s for the upper rack wheels and the clips that go in the end of the slides that keep it from sliding clear out?
For model number KDTE204ESS0
Hi Harlan, thank you for reaching out. The slide rail, part number PS12584377, and stop clip, part number PS11748187, are compatible parts for your model. We hope this is what you were looking for!
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough.
Caviat: The actual repair is less than 15 minutes, but I spent a lot of time playing with it before I figured out it was that easy and fast. You don't need to remove the dishwasher from the counter to do this. And it will probably help to look at the new part closely so you can understand where the retainer clip is to press it and release the old pump.
First remove the water from the dishwasher pan that would not drain with a wet/dry vac. Otherwise the water will all drain on the floor when you remove the pump. Then remove the two screws on the kickplate on the front of the unit below the door. Remove the kickplate/maintainence access cover. The drain pump is on the right about 8 inches in. Using two hands you grasp the drain pump with your right hand and use the left hand to push the retaining clip down. Then the drain pump will rotate 1/4 turn counterclockwise and can be removed without pulling the dishwasher out. There is likely to be some water leak out that was traped in the pump housing that you can not reach with the vac. Disconnect the wire. Connect the wire to the new pump, put it in place and 1/4 turn clockwise to install it. Replace the kickplate and you're done.
1. Open the dishwasher and remove the two plastic grommets about halfway down on either side of the opening. Then remove the two screws under the grommets.
2. Remove the kick plate under the door. May have to lower unit by turning the feet using the adjustable wrench.
3. Make sure you have enough slack in the water input line and electrical wiring that you can pull the dishwasher out about 12 inches or more.
4. There is a spring and nylon rope link on both sides of the unit. Probably just one link is broken, but the replacement comes with two, so you can replace both or save one as a spare. Look at the good side and it should be pretty self explanatory how it attaches. I found it easiest to first thread the link around the lower pulley, then attach the link to the spring, then spring to the rear support, then the link to the door.