KDRS505XSS01 KitchenAid Range - Overview
Sections of the KDRS505XSS01
[Viewing 8 of 8]
Manuals & Care Guides for KDRS505XSS01
Click to downloadInstall
Installation Instructions
(2.46MB)
Install
Installation Instructions
(4.38MB)
Manual
Owner's Manuals
(1.61MB)
Manual
Owner's Manuals
(6.21MB)
Specs
Product Specifications Sheet
(0.71MB)
Keep searches simple, eg. "belt" or "pump".
Touch-Up Paint - White
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Leveler Foot Screw (Nylon)
PartSelect #: PS16875974
Manufacturer #: W11665456
This leveling leg is two inches long. It is all black in color and it is made entirely of plastic.
$27.85
In Stock
Screw
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$26.58
In Stock
Range Insulation
PartSelect #: PS11750415
Manufacturer #: WPW10208653
Oven Wrap Insulation.
$76.96
In Stock
Surface Burner Valve - 16K - Left Front & Right Front
PartSelect #: PS11750353
Manufacturer #: WPW10206288
Burner valves are attached to the main gas line. When the switch is turned the gas then flows into a tube that mixes with air, creating the appropriate mixture for combustion.
$124.80
In Stock
Range Terminal Block
PartSelect #: PS11750972
Manufacturer #: WPW10245259
It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
$43.19
In Stock
Range Igniter Screw
PartSelect #: PS11745563
Manufacturer #: WP8273062
This screw is sold individually.
$10.09
In Stock
Broiler Pan with Roasting Rack
PartSelect #: PS1519212
Manufacturer #: W10123240
This is a 3 piece set.
$129.46
In Stock
Burner Valve - Left and Right Rear
PartSelect #: PS11750352
Manufacturer #: WPW10206287
Ensure consistent and safe burner performance with this replacement gas valve, which controls the flow of gas to a specific burner on your range or cooktop. It enables users to adjust heat levels accu...
$198.11
In Stock
Dryer Screw
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$10.09
In Stock
Inner Door Glass
PartSelect #: PS11747208
Manufacturer #: WP9757706
This is the innermost piece of glass.
$133.86
In Stock
Questions And Answers for KDRS505XSS01
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
December 11, 2023
I'd double oven do's not keep the set temperature it takes long time to do any looking I think I need thermostat or whatever you callet
For model number KDRS505XSS01
Hi George, Thank you for writing. The Temperature Sensor for this model is listed as PartSelect Number PS11744537. The Sensor can be tested. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Temperature Sensor
$199.61
In Stock
Robert
February 5, 2022
What is the part number for the yellow wires that connect to the igniter. I have five burners and the insulation on two wires is burned.
For model number KDRS505XSS01
Hello Robert, thank you for writing. The Spark Ignition Switch and Harness is PartSelect Number PS11750278. Good luck and have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Salvatore
April 27, 2023
Does it have pilot light or electronic
starter for burners
For model number KDRS505XSS01
Hi Salvatore, thank you for reaching out. The part you are looking for is the electrode, part number PS3489587. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Igniter-SURF
$58.59
Special Order
Salvatore
May 11, 2023
can the stove top be wired 110 for burners to operate?
would like to use it until the service gets upgraded to 220
For model number KDRS505XSS01
Hi Salvatore, thank you for reaching out. According to our research, the stovetop burner takes more power, so it is recommended to use them with 220V. The stovetop burner can be wired for 110V, this would be safe, but you would only get about 1/4 the power. We hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Common Symptoms of the KDRS505XSS01
[Viewing 6 of 6]Will Not Start
Fixed by
these parts
these parts
Show All
Little to no heat when baking
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Oven not heating evenly
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
mice had made nests in the insulation wrap in the range
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
Parts Used:
-
Wendy from Red Hook, NY
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
125 of 200 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner valve was seized
Lock the oven/stove controls by holding the START button for five seconds. This shuts off gas to the valve. Remove the knobs from the front of the stove using philips screwdriver. Undo the six screws that hold on the front bezel and remove to find the valve. Unscrew the top bracket using philps screwdriver. disconnect the valve using a wrench (I think it was 12mm). Compare the valve to the new one. Installation is reverse. Press the START button for five seconds to unlock the oven/stove. Test fire the burner. Cook a batch of chili.
Parts Used:
-
Steve from Tracy, CA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
84 of 94 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned terminal block and filter board
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem.
Parts Used:
-
Joseph from Decatur, GA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Socket set, Wrench set
95 of 204 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!