KCED600GBL01 Whirlpool Cooktop - Overview

Sold individually.

This dual surface element control switch is a critical component in select electric stoves, ovens, and ranges, responsible for regulating heat output and powering the surface element. It enables users to turn the burner on and off and adjust the temperature for precise cooking control. Typically located behind the front control panel, the...Read more switch connects to the wiring harness and interfaces with the surface element. If the burner fails to heat properly, fluctuates in temperature, or remains on when turned off, replacing the control switch may resolve the issue. Installation involves disconnecting power at the circuit breaker or unplugging the appliance, removing the control panel, detaching the faulty switch, and securing the new one in place while reconnecting the wiring to match the original configuration. Once installed, restore power and test the burner to ensure proper operation.

This screw is sold individually.

This surface element switch controls how much heat an electric burner makes. It turns power on and off in cycles as the knob moves from low to high. A burner that stays on high, will not heat, or heats at the wrong level may have a bad switch. Before replacing it, inspect the burner, wire ends, control knob, and nearby parts. Confirm fit ...Read morewith the full appliance model, terminal layout, and 15-amp, 240-volt rating. Turn off the breaker and verify that power is off. Move each wire one at a time before testing.

This black grease filter helps keep your cooktop’s vent system clean by trapping grease from the exhaust air. It’s easy to install—no tools needed—and protects the blower from buildup. If your current filter is dirty or damaged, this replacement is a quick fix. Just check your model to make sure it fits.

If one of your cooktop burners isn’t heating right—or not at all—this 1300-watt radiant element could be the fix. It’s the part that delivers heat to a smooth-top cooking surface and is a direct replacement for damaged or worn-out elements. Just be sure to unplug your appliance and check your model number before installing.

The downdraft vent grille attaches over the downdraft vent and directs airflow into the vent.