This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
The crisper drawer in your refrigerator is used for storing various items. If you notice that your current crisper drawer is damaged, you may need to replace it. You may notice that your refrigerator ...
$131.93
In Stock
Order within the next 11 mins and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.21
In Stock
Order within the next 11 mins and your part ships today!
This part is snapped onto the top portion of the evaporator. The thermostat sends temperature information to the processor. The defrost heater must be replaced when replacing the thermostat.
$94.47
In Stock
Order within the next 11 mins and your part ships today!
This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.
$14.16
In Stock
Order within the next 11 mins and your part ships today!
Questions And Answers for KBRA20EMSS00
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Beth
February 11, 2020
My freezer door seems too easy too open. Was wondering if a seal needs replaced and do they hold up if it’s replaced or do i need whole stainless steel drawer.
For model number KBRA20EMSS00
Hi Beth,
Thank you for your question. If the freezer door is opening too easily, check the door gasket to see if it is adhering to the refrigerator as it should. If it is not give the gasket a cleaning with a baking soda solution to see if this helps. If it is opening when you close the refrigerator door, normally indicates a good condition of door seals. This can be normal if the refrigerator door is closed quickly or slams shut. Air passages between the freezer and refrigerator allow this to happen. Make sure that the items in the freezer section are not keeping the door from shutting completely. If they are, try rearranging the items to see if this helps. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours.
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady thought process on the problem helped disengage the darned old filter!