This twenty-five watt microwave light bulb is two and a half inches long. It has a small, screw-in base and it carries 120V. This item sells in a quantity of one, though many microwaves require two.
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...
The thermistor changes resistance as it senses the refrigerator temperature and sends a corresponding voltage to the pc board.
$50.32
In Stock
Questions And Answers for KBFC42FTS05
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mitch
November 26, 2019
How do i remove the freezer drawer from this model?
For model number KBFC42FTS05
Hello Mitch, thank you for your question. You should be able to just pull it out, but lift it on the front end when the rear of the drawer is at end of the slide, to be able to lift it right out of the unit. I hope this helps!
Was this helpful?
Thank you for voting!
Mike
July 19, 2021
Water freezing at bottom of freezer. Its not draining and I guess not evaporating?
For model number KBFC42FTS05
Hello Mike, Thank you for the question. We suggest checking the Drain Tube for clogs or blockage preventing the water to drain into the pan. We hope this helps!
First I shut the water off to the refrigerator.then i pushed the big button in the middle of the grille below the refrigerator door. pulled out the old filter, took the front cap off the old filter put it on the new filter. took the two red caps off the new filter. pushed the filter in till it locked in place. all done! Turned the back on.
It's simple enough in theory: read the side of the box and follow the instructions. BUT you need to really push the knob in pretty hard (I am a girl, and my hand strength isn't that good). If you don't, when you turn the knob, the filter won't come out, then it's tougher. So: make sure the knob pops before you turn!