Models > KBDS250X4

KBDS250X4 KitchenAid Food Waste Disposer - Overview

Sections of the KBDS250X4

[Viewing 2 of 2]

Manuals & Care Guides for KBDS250X4

Click to download
Keep searches simple, eg. "belt" or "pump".
Start Switch Kit – Part Number: 8174292
Start Switch Kit
PartSelect #: PS391133
Manufacturer #: 8174292
  No Longer Available
Inner Stopper Gasket – Part Number: 4211355
Inner Stopper Gasket
PartSelect #: PS357412
Manufacturer #: 4211355
$10.09
  In Stock
Gasket – Part Number: 4211344
Gasket
PartSelect #: PS357403
Manufacturer #: 4211344
Also known as a tailpipe gasket.
  No Longer Available
Screw – Part Number: WP98008545
Screw
PartSelect #: PS11747488
Manufacturer #: WP98008545
Sold Individually.
$10.35
  In Stock
Drain Pipe – Part Number: 4211317
Drain Pipe
PartSelect #: PS357379
Manufacturer #: 4211317
$42.13
  Special Order
Sink Flange Gasket/Seal – Part Number: WP4211302
Sink Flange Gasket/Seal
PartSelect #: PS11742343
Manufacturer #: WP4211302
$10.14
  Special Order
Tailpipe Flange – Part Number: 4211345
Tailpipe Flange
PartSelect #: PS357404
Manufacturer #: 4211345
  No Longer Available
Seal and Nut Kit – Part Number: 4211578
Seal and Nut Kit
PartSelect #: PS357508
Manufacturer #: 4211578
$59.91
  In Stock
Garbage Disposal Wrench – Part Number: WP8174310
Garbage Disposal Wrench
PartSelect #: PS11744906
Manufacturer #: WP8174310
$25.22
  Special Order
Shredding Plate – Part Number: WP4211631
Shredding Plate
PartSelect #: PS11742348
Manufacturer #: WP4211631
$139.72
  Special Order
Bolt – Part Number: WP8204624
Bolt
PartSelect #: PS11745243
Manufacturer #: WP8204624
$14.60
  Special Order
COVER – Part Number: 4211611
COVER
PartSelect #: PS357519
Manufacturer #: 4211611
  No Longer Available

Questions And Answers for KBDS250X4

Ask our experts a question about this model and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kevin
July 25, 2021
Our garbage disposal stopped working. It is not jammed. I put the tool in the bottom and it moves freely. The power is on. The breaking is on. I pushed the red button on bottom. Still not working
For model number KBDS250X4
PartSelect logo
Hi Kevin, Thank you for your question. If your garbage disposal stopped working, there are some parts that you will need to check to see which one is causing the issue. You will need to check start switch and the disposal stopper. We hope this helps! Good luck with the repair!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the KBDS250X4

[Viewing 2 of 2]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Won’t start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Leak around discharge pipe
Was amazed the gasket was delivered the day after I ordered it! Removed old gasket and cleaned out what I thought was accumulated waste. Replaced gasket and ran water, had a flood. What I had removed was rusted part of appliance. Unable to repair and ended up replacing the garbage disposal. Bad Luck.
Parts Used:
Gasket
  • Richard from Freeport, ME
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Wrench set
11 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Switch was clogged with food
I need to put rubber washer and internal nut to retain the switch in place and the cover switch doesn't retain the screw ( this was passing through without retain the cover )
Parts Used:
Start Switch Kit
  • Alvaro from Norwalk, CT
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
worn out gasket
installed new gasket by hand.
Parts Used:
Inner Stopper Gasket
  • George E. from Marysville, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!