This is the replacement charcoal filter for your microwave. It is silver and black in color and measures approximately 10 inches by 2 ½ inches. The charcoal filter removes cooking odors from the air ...
This is a genuine replacement 40 watt bulb for a microwave. The bulb is meant to light up the underside of the microwave or inside of your microwave when the door is open or during use. If your bulb i...
This turntable motor is for microwaves.
The turntable motor rotates the glass tray inside the microwave oven.
Because high-voltage capacitors in a microwave can retain a lethal electrical charge...
Ask our experts a question about this model and we'll get back to you as soon as possible!
10 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Karel Blackmore
January 27, 2020
Every time i use the microwave, it trips the circuit breaker. Can you provide an answer as to what is causing this problem and a fix for it?Thank you.
For model number JVM3160DF4BB
Hello and thank you for writing.
When an appliance such as a microwave oven repeatedly trips the circuit breaker, it's overloading the electrical circuit, which is rated to handle a finite number of amps. Too many items are plugged into the same circuit that the microwave oven is one cause another cause is a short in the microwave itself. It certainly sounds like it could be a faulty line fuse or thermostat, you should check the part(s) for signs of damage, and replace it as needed. Please see the part links related to this question just beneath this answer. We hope this helps. Please contact us anytime if you require further assistance.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Maria
January 30, 2023
I need a handle
For model number JVM3160DF4BB
Hello Maria, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8754172. We hope this is helpful!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Lois
February 5, 2020
Suddenly stopped. Apparently no power?
For model number JVM3160DF4BB
Hi Lois,
Thank you for your question. If the microwave is not working, there are some parts that you will need to check to see which one is causing the issue. You will need to check the fuse, the diode, the magnetron, the door switches and the electronic control board. You will need to test the parts with a multi-meter. Here is a link to one of our videos on YouTube that you may use as a general reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. For the electronic control board, you will need to inspect it visually for signs of wear, damage or burn marks. If it shows any of those signs, you will need to replace it. To test the fuse, the diode and the magnetron, you will need to release the potentially dangerous charge from the capacitor by placing a screw driver with an insulated handle across the terminals. Be careful not to touch the metal portion of the tool. If you are not comfortable doing this yourself, please get an electrician to help you with this repair. We hope this helps. Thank you and have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Stephanie
February 28, 2020
How do i remove the grill cover to access charcoal filter. I removed screws and the end of the grill cover near control panel will come open but the end of the grill cover near the hinge side will not budge. I tried sliding it over, then prying it over....i tried pulling it out but will not budge. i do not want to break the plastic grill cover....i need help.... it is a brand new microwave
For model number JVM3160DF4BB
Hello, Thank you for your question. There usually are tabs that would need to be pulled to release. However if not you may need to remove the one side and then pull it towards the way that side was taken off to release and pull it out. We hope this helps.
Was this helpful?
Thank you for voting!
Barb
October 29, 2021
I need a coupler, part 105.
For model number JVM3160DF4BB
Hello Barb, thank you for writing. The correct part for your model number is Microwave Turntable Motor Coupler PartSelect Number PS8753744. We hope to hear from you soon.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Open the front cover by pushing it at the top (where it says “Push”), lifting up and pushing back on top edge of the old filter. Pull it out. Installing the new one is basically just the reverse of those steps! That simple.
Old filter did seem to be a little thicker (filter material), but the new one was the exact same dimensions, so it went in properly. Wish the filter material was white, so you knew just how dirty it was actually getting. But... :-D
1. Unplug unit 2. Open door, remove two screws above the top trim piece, slide and remove trim. 3. Remove screw behind control board and top left corner, then release from position. 3b. Unplug all wire terminations and set control panel aside. 4. Remove two screws securing latch board, lift and rotate board out of position, remove three micro switches, xfer monitor switch actuator from lower pin in old board and insert in new. Install new door switches and reverse procedure to complete repair.
Note 1. Take care to located new latch board so holding tabs line up, pass through frame, and openings for door tangs line up with openings in frame before securing with screws.
